|
FAQ
• Login
|
|
It is currently Sat Jun 28, 2025 4:20 pm
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Author |
Message |
Quack Smacker
MMT Member
Joined: Sat Jul 03, 2010 7:29 pm Posts: 8
|
 possible air lock
had motor running last night and ran outta fuel. now today refilled tank and couldnt get her to fire. i can see no fuel entering filter on fuel line. of course i have no primer bulb on my line any suggestions guys
|
Sat Aug 07, 2010 9:19 pm |
|
 |
deadbird8
MMT 1000 Club
Joined: Wed Feb 04, 2009 7:50 pm Posts: 3833 Location: Old East Dallas, Texas
|
 Re: possible air lock
Close the vent on the tank and stand on it or blow into the tank to pressurize the line. You can take off the air filter and drop a little fuel in the carb intake to just get it started (or use starting fluid).
I don't run with a primer bulb either and my old motor had a hard time when I ran it out of gas (same as you describe), my CDI with the different pump setup doesn't seem to have a problem at all. I guess its different on every motor.
_________________ Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that
|
Sun Aug 08, 2010 5:08 am |
|
 |
Quack Smacker
MMT Member
Joined: Sat Jul 03, 2010 7:29 pm Posts: 8
|
 Re: possible air lock
tried that man got fuel ti the filter one time but couldnt get it back think my fuel pump might be out. i get the motor runnin with starting fluid but only momentary because lack of fuel.
|
Sun Aug 08, 2010 5:42 am |
|
 |
DeathMetalDukk
MMT 1000 Club
Joined: Sat Jun 27, 2009 11:50 pm Posts: 3777 Location: Knotts Island, North Carolina.
|
 Re: possible air lock
Pick you up a primer bulb and pump it up tight, and get the motor running with carb cleaner while you pump the sht out of the bulb. If you get the fuel lines all tight and it still won't run, you probably lost yer fuel pump. I run an electric fuel pump from Napa because my motor's pump wouldn't pull gas from the front of the boat.
_________________ Put yer face in the myrtles.
35 GTR chasing a 1650 Polarkrap.
|
Sun Aug 08, 2010 6:13 am |
|
 |
Quack Smacker
MMT Member
Joined: Sat Jul 03, 2010 7:29 pm Posts: 8
|
 Re: possible air lock
appreciate it guys
|
Sun Aug 08, 2010 6:41 am |
|
 |
saveontaxes
MMT Pro Member
Joined: Sat Aug 29, 2009 10:16 am Posts: 400
|
 Re: possible air lock
_________________ Gator Trax 1854 ran over by drunk driver!! ( boat less)
|
Sun Aug 08, 2010 8:20 am |
|
 |
deadbird8
MMT 1000 Club
Joined: Wed Feb 04, 2009 7:50 pm Posts: 3833 Location: Old East Dallas, Texas
|
 Re: possible air lock
If all else fails, there is the e-fuel pump cure!
_________________ Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that
|
Thu Aug 12, 2010 5:04 pm |
|
 |
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Who is online |
Users browsing this forum: Google [Bot] and 156 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|