It is currently Fri Jul 18, 2025 1:18 pm




Reply to topic  [ 17 posts ] 
 Making Engine Dig In? 
Author Message
MMT Addict
User avatar

Joined: Tue Aug 11, 2009 10:55 am
Posts: 743
Location: Ft. Lauderdale, FL
Post Making Engine Dig In?
I've only had my MM a few months now and I'm still learning. So my question is if there's any trick you guys use to make your engine dig in better? The reason I'm asking is because I hide my boat in saw grass which most of the time is pretty thick. So when it's time to leave, the engine is usually sitting on top of the saw grass and I can't get it to dig into it. I've tried moving the engine around back and forth and it helps a little but not much. I think the main problem I have is that the trim on my engine only moves my motor up and relies on the engines weight to bring it back down. If it worked like on an outboard where the trim would actually pull the engine down, this wouldn't be an issue but would probably destroy the engine if I hit something since it wouldn't float like it is now. So any tips you guys can give me will be appreciated and before someone tells me I should've bought an engine with reverse, not even reverse would get me out of the saw grass if the motor isn't even in the water.

_________________
"We Are Products Of Our Decisions"

Gator Trax 1750HD With Mud Buddy Black Death 5500


Wed Dec 29, 2010 9:10 pm
Profile
MMT Elite Member
User avatar

Joined: Tue Jan 13, 2009 8:02 pm
Posts: 6243
Location: Bossier City
Post Re: Making Engine Dig In?
Pull up on the tiller handle.

_________________
18x48 Charles Leonard / 36PD

"I do think there is a Squatch in these woods"!!!!!


Wed Dec 29, 2010 9:29 pm
Profile
MMT 1000 Club
User avatar

Joined: Mon Feb 16, 2009 6:09 pm
Posts: 4232
Location: Cypress, TX
Post Re: Making Engine Dig In?


Wed Dec 29, 2010 9:50 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 5:23 am
Posts: 4514
Location: Lafayette, La
Post Re: Making Engine Dig In?
Lock the reverse latch and trim down



Oh wait -- nvm


Wed Dec 29, 2010 10:35 pm
Profile
MMT 1000 Club
User avatar

Joined: Fri Aug 21, 2009 9:40 am
Posts: 1703
Location: Groves, Texas
Post Re: Making Engine Dig In?
Dont pull it so far up into the saw grass...leave close enough that you can push it out.


Thu Dec 30, 2010 7:52 am
Profile
MMT 1000 Club
User avatar

Joined: Thu Mar 11, 2010 8:25 pm
Posts: 1588
Location: South Louisiana
Post Re: Making Engine Dig In?
i trim mine all the way down, then i lift the motor up with the handle giving it gas in forward and drop it, it will eventually dig a hole, and i do use my reverse in the situation also to dig it dont a little too, it does help.


Thu Dec 30, 2010 9:00 am
Profile
MMT Addict
User avatar

Joined: Tue Aug 11, 2009 10:55 am
Posts: 743
Location: Ft. Lauderdale, FL
Post Re: Making Engine Dig In?
Thanks for the tips guys and yesterday I got stuck pretty bad in the saw grass again but was able to get out. The problem I have is that if I don't put the boat far enough in the saw grass, or in saw grass high enough, the ducks will start flaring a hundred yards out. Then when I put it deep enough to where I could just barely see the decoys, they will fly right over my head and come into the decoys, never knowing that I was there.

I have a buddy that put one of those fastgrass blinds on his boat and the ducks still flare, it's like they know what belongs in the glades and what doesn't.

_________________
"We Are Products Of Our Decisions"

Gator Trax 1750HD With Mud Buddy Black Death 5500


Fri Dec 31, 2010 10:35 am
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6060
Location: Choudrant, La
Post Re: Making Engine Dig In?
So, you dont even use a blind you just pull up in there and drape grass over the boat?

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Fri Dec 31, 2010 11:59 am
Profile
MMT Addict
User avatar

Joined: Tue Aug 11, 2009 10:55 am
Posts: 743
Location: Ft. Lauderdale, FL
Post Re: Making Engine Dig In?

_________________
"We Are Products Of Our Decisions"

Gator Trax 1750HD With Mud Buddy Black Death 5500


Fri Dec 31, 2010 12:08 pm
Profile
MMT Pro Member
User avatar

Joined: Thu Jan 15, 2009 2:26 pm
Posts: 146
Location: Vanceboro, NC
Post Re: Making Engine Dig In?
How about a push pole??? :mrgreen:

_________________
"They call us civilized, cause we're easy to sneak up on!"


Sat Jan 01, 2011 5:44 am
Profile
MMT 1000 Club
User avatar

Joined: Sun Oct 04, 2009 4:34 pm
Posts: 1182
Location: Beaumont TX
Post Re: Making Engine Dig In?
watch my videos :mrgreen:
[youtube]http://www.youtube.com/watch?v=1ZQLo9SJnUE[/youtube]









CAN YOUR PD DO THIS?


Sat Jan 01, 2011 6:22 am
Profile WWW
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 5:23 am
Posts: 4514
Location: Lafayette, La
Post Re: Making Engine Dig In?
Can your mudbuddy do this?


[youtube]http://www.youtube.com/watch?v=tJ_YcvVaaJk[/youtube]


:mrgreen:


Sat Jan 01, 2011 10:29 am
Profile
MMT Pro Member

Joined: Thu Jun 10, 2010 8:59 pm
Posts: 98
Location: South Florida
Post Re: Making Engine Dig In?
Hunt away from the boat. Blinds don't work well in the glades. I cover my boat with camouflage netting and shove it way up into the grass 30-40 yards away from where I'm hunting. Works great and doesn't flare the ducks. Need to get one of the hotti motor covers though so I don't have to wait for it to cool.

Nathan

_________________
1656 Go-Devil with a Mud Buddy 27 Mini.


Sat Jan 01, 2011 2:32 pm
Profile
MMT Pro Member

Joined: Wed Nov 24, 2010 5:07 am
Posts: 276
Location: Miramar Fl
Post Re: Making Engine Dig In?


Sun Jan 02, 2011 4:37 am
Profile
MMT Member

Joined: Fri Sep 03, 2010 10:36 am
Posts: 26
Post Re: Making Engine Dig In?
Chico,

If ducks are flaring 100 yds away its because ringers are flaring off the mojo's during the late season... if you have no shine on the engine and you are where the ducks want to be... then you need to loose the mojo's! Teal love them but ringers hate them late season.. good luck


Wed Jan 12, 2011 12:25 pm
Profile
MMT 1000 Club
User avatar

Joined: Sun Oct 04, 2009 4:34 pm
Posts: 1182
Location: Beaumont TX
Post Re: Making Engine Dig In?


Wed Jan 12, 2011 5:54 pm
Profile WWW
MMT Sponsor

Joined: Tue Jan 13, 2009 7:07 pm
Posts: 16608
Post Re: Making Engine Dig In?
Yall and yall Videos!!! :roll: :roll: :mrgreen:

_________________
17x48 extreme stage 2 GTR
20X60 DUAL RIG BOWFISHING ADDITION
http://www.scalesandtailsbowfishing.com


Wed Jan 12, 2011 5:56 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 17 posts ] 

Who is online

Users browsing this forum: No registered users and 104 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: