OK i started playin around with my spare stainless 35 hp exhaust today to make it flow better and sound better!!!! I will try to keep yall updated as the build goes on!!!!

and when im done i will try to do some sound clips to!!!!

Are you gunna re weld the ends?

No i think im going to try it like that first LOL!! yes man i have to re weld the tail pipe and the ends and im still tryin to decide if im going to do a baffle or not!!!! and i see why these mufflers have no performance cause they have them choked up bad!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Weld that baffle hole shut and have a pipe come out each side cap then do a 90 turn.

for $250.00 i'll do that and ship it to u!!!!!!!!!!!!!!!!!!!!!!!

I've done a few like that and they sound great. They have a tendancy to backfire though.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

just need a couple of restricter plates welded in front of the inlet pipes maybe half moon shaped

I gutted a non-stainless, didn't add any baffles, and welded the end caps back on.


Sounded like chit IMO

yeah !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

well guys i finished welding everything up today and bolted on and tried it and to my amazement it sounded alot better then i thought cause i was worried about it being really stupid loud and it isnt !!!! louder than stock of corse but a good mellow tone!!!! the camera i took video with is old so sound sucks on it!!! I will be puttin the boat in the water tomorrow to see what kind of gains i get from the exhaust and will let yall know!!!!

good job on the welds bro, looks good.

Thanks auto and man that chit is hard to weld very thin and not the best quality stainless for sure!!!!!! O and some help on loading the video it takes forever then it say internal server error????????????

man i dunno sh*t bout loadin a video on here. i think you gotta post it on youtube first, then copy and paste the link if i had to guess

ok try this

http://www.youtube.com/watch?v=fsCI6JZnSJU

dam it sounds good bud!

O yeah Fella's i also have plans for makin a custon 35 exhaust (it's for a buddy the 1 that likes things loud ) im guessing its going to sound real close to a harley!!!!! LOL i order'd all the material for it today!!!

Did you go with baffle or no baffle sounds good man great job

Ancient chinese secret LOL!!!! I'll tell later and man i wish yall could hear it in real life cause that video sucks azz!!! NO Any body wants one LOL!!!!

Just curious just got a tig setup for welding machine and I mite have to try that

well i heliarced it and it was not easy cause the stainless is very low quality !!!! but im going to send u a pm!!

Sorry guys i couldn't make it out on the water today weather was to bad!!!

Sounds good from what I could hear. What type of set up do you have that mochine on ??

What is that motor sitting in?

looks like a mudboat, one of those super go devils maybe?

No super go-devil here just and old school mud boat !!!!! The shaft goes through the bottom of the haul on a 15 degree angle!!!!!

ok so i finally got to take the boat out today with the mod'd exhaust!!!! S i picked up 120 more rpm but i all so had an extra 70lbs in the boat that i normally don't have and with a boat as skinny as mine that's alot!!!! And the sound is awsome not crazy loud but a good mellow tone!!!! I'm 100% satisfied!!!! My buddy want's me to do his now after hearin mine!!!

I'll ship you mine and you can do it.

We have done a few the same way but we put a bigger outlet in them. Like 2 1/4" pipe about 3" long that is slash cut.

well i didnt want to change to a bigger outlet Reason #1 To loud (loud dosent mean power) #2 back pressure(u need some to make power)!!!!!!!!

go put dual exhaust on ur truck and put 2 1/2 tips on it and run it for a day then go put 4 inch tips on it and u tell me!!!!

ok the muffler is altered!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!@#$%^&*())(*&^%$#@@!