So I been thinkin about what exhaust I wanted, and I came to the conclusionI wanted something different, so this is what i came up with. I got this polished stainless chink muffler off of ebay for $20, then used some stainless tube to make the head pipes. Im curious to see what it sounds like, it even came with a removable baffle.

I dont care what exhaust you have.. Make sure you have a slip fit at the head. If not it WILL CRACK.

thanks for the info, luckily I havent welded that part yet

Great looking muffler!!!

I'm going to be negative nanny for a second. Take it for what its worth...maybe nothing. From just looking at the join between the two exhaust tubes, that 45 degree angle might create some unwanted restriction. All the exhausts I've see, but granted I haven't seen that many, have smooth, nicely curved corners to help with the exhaust flow. Maybe something you want to experiment with further.

where the two meet, they ARE welded at a 45, BUT, then they were cut after welding, to create an oval opening.

the tip kinda looks like a gecker,i really liked my gecker duals but they didnt like the salt water,or maybe it was the fact that the tips would get wet when hot and get wet again that caused me to blow the whole end off where the adjustable baffle is?
there will prolly be a blue flame coming out,may only notice at night,and the fwd pipes gonna glow orange,looks bad ass....brace it good.
not tryin to knock your build in any way,with the price of aftermarket shit,diy is the way to go.
i been thru a few diff muffs on a few diff motors and so far,marshmellow 2x is my fav.

thanks Cajun, the nice thing is i wont have much $ tied up in it, so if I dont like it, itll go to the scrap yard for .02 a lb.

Here is a link on the gecker duals and a video, I bet yours will sound close to the same.
viewtopic.php?f=2&t=5006

Don't get Geckered! RUN!!!

LOL, this exhaust is in no way affiliated with Gecker

ha I know man, if geckers are solid welded to the flange, how do they keep em from cracking?

hey auto what are u going to use for flanges???LOL

Looks good. Just a thought , but a cross pipe between the two outlets close to the heads will definitely take out alot of noise (i know from playing around) and will supposedly help with performance (was told but haven't tested). I can help you out with flanges if you haven't gotten that taken care of yet.

ive got a set of flanges off of an old exhaust im going to use. i used an old muffler to make a jig so i could have the exhaust built before i had my engine

Auto thats looking good bro!! I just got my new marsh mellow in today.. No baffels!!

does anyone know the size of the bolts that goes onto the head for the slip flange.. I pulled my EVT off and sold it along with the hardwear. the marshmellow didnt come with the 4 bolts..

autogateman works for GECKER ????

hey auto get with marsh mellow performance and he might sell u some stainless steel flanges!!!

You have to take your chances with flanges cracking. I know people with slip flanges and they have cracked aswell. Mine cracked with both. My next flanges are gonna be made of typ 316L stainless. See how that works out.

That Chinese muffler you have with the adjustable baffles is definitely the ones Gecker uses. I have been running his original prototype muffler for the last three years. It finally gave out at the end of the season. He uses a muffler for each head, but they are actually pretty good mufflers. You may want to try a dual set up rather than the 45 deal- but it looks good. Good luck.

auto are you geckers alter ego?

Looks good.... Keep us informed....

AngryBee.mp3

i finally finished up today on the exhaust, it came out pretty good. it has a nice rumble to it similar to the mm exhaust.

Awesome

Rod that "brass knucks" brace is a cool touch....

Pretty bad arse, looks mean! Good work brother!

Post video of sound looks cool

thanks guys! i took a vid with my phone, but the sound is shit in the vid.

knuckles are sweet! looks great man!

Not to beat a dead horse, but that brace is freaking awesome.