|
|
FAQ
• Login
|
|
It is currently Sun Jun 22, 2025 2:31 am
|
|
Page 1 of 1
|
[ 8 posts ] |
|
| Author |
Message |
|
MeatWagon
MMT Pro Member
Joined: Tue Jan 25, 2011 1:22 pm
Posts: 497
|
 GDSD 35 I have a question that i hope someone can answer. Underneath the prop is a fin that is bent slightly to the side. What is that for? It has moved all the way over and i have seen a decrease in speed . any help is appreciated.
_________________
SENT VIA HOOT OWL!
I drive a Godevil and don't give a shit about your message!!!
MeatWagon
GoDevil 35 Surface Drive on a 13x60 MaxCraft AIRBOAT HULL!
|
| Wed Mar 16, 2011 1:48 am |
|
|
|
MeatWagon
MMT Pro Member
Joined: Tue Jan 25, 2011 1:22 pm
Posts: 497
|
Re: GDSD 35
_________________
SENT VIA HOOT OWL!
I drive a Godevil and don't give a shit about your message!!!
MeatWagon
GoDevil 35 Surface Drive on a 13x60 MaxCraft AIRBOAT HULL!
|
| Wed Mar 16, 2011 2:33 am |
|
|
|
mcnemar1982
MMT Sponsor
Joined: Mon Jan 19, 2009 4:03 pm
Posts: 2216
Location: Walker, Louisiana
|
Re: GDSD 35
_________________
Ideas not coupled with action
never become bigger than the
brain cells they occupied.
Owner
DEEP SOUTH CUSTOM BOATS (225) 252-2700
Good boats ain't cheap, Cheap boats ain't good!
|
| Wed Mar 16, 2011 7:08 am |
|
|
|
Gigafowl
MMT Elite Member
Joined: Tue Jan 13, 2009 7:19 pm
Posts: 6441
Location: Trinity Bay - Texas
|
Re: GDSD 35 The bend in the verticle fin below the prop is to offset prop torque.....
Really doubt that bend has changed any though - more likely you
are getting some prop wear from that neked mud runnin' ! ! !
On a new 3 blade GDSD prop the blades measure 3 1/2" across in the
widest or fatest part of the blade - the first little bit of wear actually
makes you run faster - but when the wear gets worse and your
blade gets to 3 1/4" across it begins to loose speed and performance
and at 3 1/8" you will be over reving and bumping the rev-limiter all
the time....
When they are less than 3 1/4" - you need a new prop...
_________________
Eat - Sleep - Hunt ! ! !
"It is good to have an end to journey toward; but
it is the journey that matters, in the end."
|
| Wed Mar 16, 2011 7:14 am |
|
|
|
MeatWagon
MMT Pro Member
Joined: Tue Jan 25, 2011 1:22 pm
Posts: 497
|
Re: GDSD 35
_________________
SENT VIA HOOT OWL!
I drive a Godevil and don't give a shit about your message!!!
MeatWagon
GoDevil 35 Surface Drive on a 13x60 MaxCraft AIRBOAT HULL!
|
| Wed Mar 16, 2011 12:36 pm |
|
|
|
MeatWagon
MMT Pro Member
Joined: Tue Jan 25, 2011 1:22 pm
Posts: 497
|
Re: GDSD 35
_________________
SENT VIA HOOT OWL!
I drive a Godevil and don't give a shit about your message!!!
MeatWagon
GoDevil 35 Surface Drive on a 13x60 MaxCraft AIRBOAT HULL!
|
| Wed Mar 16, 2011 12:37 pm |
|
|
|
autogateman
MMT Sponsor
Joined: Thu Sep 16, 2010 10:32 pm
Posts: 4036
Location: Gonzales La
|
Re: GDSD 35 that needs to have a bend in it. the pd has a wedge welded to the skeg for the same reason
|
| Wed Mar 16, 2011 2:16 pm |
|
|
|
Cammander26
MMT Pro Member
Joined: Mon Oct 04, 2010 1:09 pm
Posts: 315
|
Re: GDSD 35 so you wont be sitting there holding it towards you
_________________
TRYIN' TO LEAVE A CARBON FOOT PRINT!
BUMMIN RIDES AT THE MOMENT, UNDER CONSTRUCTION!
|
| Wed Mar 16, 2011 4:19 pm |
|
|
|
|
|
Page 1 of 1
|
[ 8 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 72 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
