|
|
FAQ
• Login
|
|
It is currently Sun Jul 06, 2025 2:33 pm
|
|
Page 1 of 1
|
[ 7 posts ] |
|
| Author |
Message |
|
Snowbird
MMT Pro Member
Joined: Sat Aug 08, 2009 12:44 am
Posts: 91
Location: Salt Lake City, Ut 84121
|
 Intake Porting Has anyone here done some port and polish on their stock carb's intake? any tips or just clean up the factory slop?
_________________
23 MB mini w/ IM heads, BPS rockers/rods and gutted exhaust on a rivited 1648 crestliner.
|
| Fri Aug 12, 2011 5:38 pm |
|
|
|
Snowbird
MMT Pro Member
Joined: Sat Aug 08, 2009 12:44 am
Posts: 91
Location: Salt Lake City, Ut 84121
|
Re: Intake Porting
_________________
23 MB mini w/ IM heads, BPS rockers/rods and gutted exhaust on a rivited 1648 crestliner.
|
| Fri Aug 12, 2011 5:56 pm |
|
|
|
jordy
MMT 1000 Club
Joined: Thu Mar 11, 2010 8:25 pm
Posts: 1588
Location: South Louisiana
|
Re: Intake Porting I'm interested to know what kind of gains this will produce......?
|
| Fri Aug 12, 2011 8:56 pm |
|
|
|
Snowbird
MMT Pro Member
Joined: Sat Aug 08, 2009 12:44 am
Posts: 91
Location: Salt Lake City, Ut 84121
|
Re: Intake Porting
_________________
23 MB mini w/ IM heads, BPS rockers/rods and gutted exhaust on a rivited 1648 crestliner.
|
| Fri Aug 12, 2011 9:43 pm |
|
|
|
deadbird8
MMT 1000 Club
Joined: Wed Feb 04, 2009 7:50 pm
Posts: 3833
Location: Old East Dallas, Texas
|
Re: Intake Porting I did a lot of them, as well as gasket matching, you can relax the 90 degree turns and smooth out the flow. Theres a post on the site you just registered on. Increasing the flow gives some RPM and better accelleration.
_________________
Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that
|
| Sat Aug 13, 2011 5:16 am |
|
|
|
po po mud duck
MMT Pro Member
Joined: Wed Jun 30, 2010 7:13 am
Posts: 317
Location: Port Arthur TX.
|
Re: Intake Porting
You do not have the required permissions to view the files attached to this post.
_________________
Casey
|
| Sat Aug 13, 2011 8:12 am |
|
|
|
dguidry
MMT Super Elite Member
Joined: Tue Jun 29, 2010 1:20 pm
Posts: 11166
Location: Cecilia, LA
|
Re: Intake Porting The work done in those pics looks nice. I know that results in better flow but what is the improvement in real numbers: torq, rpms, mph? Anyone have dyno stats for porting and polishing like this?
_________________
Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI.
“Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.
|
| Sat Aug 13, 2011 8:29 am |
|
|
|
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 157 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
