Author |
Message |
theplayer
MMT Pro Member
Joined: Tue Oct 18, 2011 6:46 am Posts: 70
|
 1754 with 35 GTR speeds
Is it even possible for a stock 35 GTR on a regular 1754 GT boat to run 30 with 2 people and gear and 37 with 1 person and no gear? I was told this and was wondering if it was remotely possible.
|
Sat Jan 14, 2012 5:21 pm |
|
 |
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: 1754 with 35 GTR speeds
Not likely.
|
Sat Jan 14, 2012 6:32 pm |
|
 |
DuckHunterF250
MMT 1000 Club
Joined: Tue Jun 29, 2010 8:32 pm Posts: 1801 Location: atlanta texas
|
 Re: 1754 with 35 GTR speeds
no! aint gonna gain 7mph by just putting 1 person outta the boat, may run 30 with 2 peeps and a light load but damn sure aint gonna run 37 with a stock motor.
_________________ 1854 DeadFowl custom boat 35 GTR "The bitterness of poor quality remains long after the sweetness of low price is forgotten."
|
Sat Jan 14, 2012 6:37 pm |
|
 |
DeathMetalDukk
MMT 1000 Club
Joined: Sat Jun 27, 2009 11:50 pm Posts: 3777 Location: Knotts Island, North Carolina.
|
 Re: 1754 with 35 GTR speeds
A stage 1 will see 30 with 2 peeps, you'll have to go stage 3 to get 37 empty.
_________________ Put yer face in the myrtles.
35 GTR chasing a 1650 Polarkrap.
|
Sat Jan 14, 2012 6:39 pm |
|
 |
theplayer
MMT Pro Member
Joined: Tue Oct 18, 2011 6:46 am Posts: 70
|
 Re: 1754 with 35 GTR speeds
|
Sat Jan 14, 2012 7:40 pm |
|
 |
dfou
MMT 1000 Club
Joined: Sun Dec 12, 2010 12:38 am Posts: 3986 Location: Pville, La
|
 1754 with 35 GTR speeds
|
Sat Jan 14, 2012 7:57 pm |
|
 |
DuckHunterF250
MMT 1000 Club
Joined: Tue Jun 29, 2010 8:32 pm Posts: 1801 Location: atlanta texas
|
 Re: 1754 with 35 GTR speeds
robert4wd's stock motor runs 30. believe that brooks said his ran 30+ when he got his rig new.
_________________ 1854 DeadFowl custom boat 35 GTR "The bitterness of poor quality remains long after the sweetness of low price is forgotten."
|
Sat Jan 14, 2012 7:58 pm |
|
 |
JIMMY W
MMT 1000 Club
Joined: Tue Jan 13, 2009 8:02 pm Posts: 4534 Location: South Louisiana
|
 Re: 1754 with 35 GTR speeds
Mine will run 30 if boat is empty!It is stock with a EVT exhaust.
_________________ 17/54 GT EXTREME Center Console, Huntdeck w/ GTR 35
Hoyt Mods and some other goodies
|
Sat Jan 14, 2012 8:03 pm |
|
 |
dfou
MMT 1000 Club
Joined: Sun Dec 12, 2010 12:38 am Posts: 3986 Location: Pville, La
|
 1754 with 35 GTR speeds
|
Sat Jan 14, 2012 8:10 pm |
|
 |
dfou
MMT 1000 Club
Joined: Sun Dec 12, 2010 12:38 am Posts: 3986 Location: Pville, La
|
 1754 with 35 GTR speeds
I know alotta people claim they're motors run 30. None "I" know of will do it stock. Not sayin it can't happen just none I've seen
|
Sat Jan 14, 2012 8:13 pm |
|
 |
theplayer
MMT Pro Member
Joined: Tue Oct 18, 2011 6:46 am Posts: 70
|
 Re: 1754 with 35 GTR speeds
I'm talking a regular 1754 with bone stock GTR no add ons. Dude selling it said it runs 30 with 2 people but I'm skeptical.
|
Sat Jan 14, 2012 8:16 pm |
|
 |
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: 1754 with 35 GTR speeds
They might blip 30 on the gps in the shallows and they see it, after that, their rig runs 30.
|
Sat Jan 14, 2012 8:18 pm |
|
 |
DeathMetalDukk
MMT 1000 Club
Joined: Sat Jun 27, 2009 11:50 pm Posts: 3777 Location: Knotts Island, North Carolina.
|
 Re: 1754 with 35 GTR speeds
_________________ Put yer face in the myrtles.
35 GTR chasing a 1650 Polarkrap.
|
Sat Jan 14, 2012 8:21 pm |
|
 |
DeathMetalDukk
MMT 1000 Club
Joined: Sat Jun 27, 2009 11:50 pm Posts: 3777 Location: Knotts Island, North Carolina.
|
 Re: 1754 with 35 GTR speeds
_________________ Put yer face in the myrtles.
35 GTR chasing a 1650 Polarkrap.
|
Sat Jan 14, 2012 8:22 pm |
|
 |
dfou
MMT 1000 Club
Joined: Sun Dec 12, 2010 12:38 am Posts: 3986 Location: Pville, La
|
 1754 with 35 GTR speeds
|
Sat Jan 14, 2012 8:23 pm |
|
 |
SP
MMT 1000 Club
Joined: Thu Nov 19, 2009 1:46 pm Posts: 1210
|
 Re: 1754 with 35 GTR speeds
|
Sat Jan 14, 2012 9:46 pm |
|
 |
JIMMY W
MMT 1000 Club
Joined: Tue Jan 13, 2009 8:02 pm Posts: 4534 Location: South Louisiana
|
 Re: 1754 with 35 GTR speeds
_________________ 17/54 GT EXTREME Center Console, Huntdeck w/ GTR 35
Hoyt Mods and some other goodies
|
Sun Jan 15, 2012 4:21 pm |
|
 |
craig
MMT Elite Member
Joined: Tue Jan 13, 2009 7:53 pm Posts: 7515 Location: Chauvin
|
 1754 with 35 GTR speeds
Being able to run 30 mph is very possible. Some boats do, some don't. When new, my boat and stock motor ran 30 mph.
However, no stock motor will push a boat 37 mph.
_________________ 1750 GatorTail Extreme/Stage 3 37 GTR HD Procrastination is a lot like masturbation. Sure it sounds great at the time but, in the end your only f--k--g yourself.
|
Mon Jan 16, 2012 10:28 am |
|
 |
keestan31
MMT 1000 Club
Joined: Fri Aug 21, 2009 9:40 am Posts: 1703 Location: Groves, Texas
|
 Re: 1754 with 35 GTR speeds
It could run 30 with stock motor, but not with 2 people and gear its not gonna run 30
|
Mon Jan 16, 2012 11:36 am |
|
 |
QuackWacker
MMT Member
Joined: Sun Jun 05, 2011 3:16 pm Posts: 23
|
 Re: 1754 with 35 GTR speeds
my 7000 on 1650 xpress 30 up river 34 down on gps and it out runs most stock 35s at 1/2 throttle. idk about these fairytale speeds people are getting
|
Mon Jan 16, 2012 7:26 pm |
|
 |
griz
MMT Member
Joined: Wed Jan 06, 2010 10:17 am Posts: 4
|
 Re: 1754 with 35 GTR speeds
I got a stock 35 GTR and a 14.5' boat. Lite load I touch 30 in optimal conditions normally run 28. 37 my azz.
|
Tue Jan 17, 2012 12:00 pm |
|
 |
dog walker
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5282 Location: Meraux,La.
|
 Re: 1754 with 35 GTR speeds
My stock motor on a 16x48 would touch 30 in the right conditions but would run 29. The same hull modded engine would run 34 tops,35 with a skinny mofo at the tiller. Now the same hull has a cdi GTR on it and I have a hard time making it run over 28.
I have a 17x54 GT boat and even with the modded motor it would not run over 35 light. With a stock cdi motor it would run 28 and with 3 people and hunting gear it would run 24.
|
Tue Jan 17, 2012 12:38 pm |
|
 |
50fps
MMT 1000 Club
Joined: Tue Jan 13, 2009 6:42 pm Posts: 2377 Location: West Coast Wisconsin
|
 Re: 1754 with 35 GTR speeds
|
Tue Jan 17, 2012 1:15 pm |
|
 |
NFW
MMT Addict
Joined: Tue Jul 13, 2010 5:45 pm Posts: 625 Location: North Florida / Jackson, MS
|
 Re: 1754 with 35 GTR speeds
I'll hit 30 when winds kicking and behind me most the time by myself I run 28 bumping 29 and 2 people no gear 28 solid
_________________ 1754 GTB / 35 GTR
|
Wed Jan 18, 2012 9:10 am |
|
 |
duckduckboom
MMT Elite Member
Joined: Tue Nov 23, 2010 6:33 pm Posts: 5603 Location: Corner of Hell an high water, La
|
 Re: 1754 with 35 GTR speeds
I hit 33 once in deep water but that current was ripping through the bush canal storm gate. There was a foot an a half difference from one side to the other. When I went the other way I was one plane doing about 3 mph
_________________ You have your whole life to be an idiot, take a day off!
|
Wed Jan 18, 2012 9:16 am |
|
 |
robertb4wd
MMT 1000 Club
Joined: Sat Jul 18, 2009 7:18 pm Posts: 1501 Location: Bridge City, Texas
|
 Re: 1754 with 35 GTR speeds
I posted a vid on youtube of mine running 30 in deep water. All I have done is put a MM exhaust. It runs 30 most of the time with a new prop and a light load.
_________________ 1754 Gatortail Extreme / 35 GTR
|
Fri Jan 20, 2012 4:30 pm |
|
 |
3rd Coast Killer
MMT 1000 Club
Joined: Thu Aug 27, 2009 3:17 pm Posts: 2624 Location: League City, Texas. It's where I play.
|
 Re: 1754 with 35 GTR speeds
My rig will hit a steady 28-29 with 2 people and cooler of beer. (with a new prop)
_________________
Kool-Aid Brigade
www.southernfowler.com
|
Fri Jan 20, 2012 4:43 pm |
|
 |
bubba777
|
 Re: 1754 with 35 GTR speeds
I hit 33 no wind with gamewarden chasing me lol
|
Wed Feb 15, 2012 12:14 am |
|
 |
POKER1
MMT Elite Member
Joined: Tue Jan 13, 2009 8:02 pm Posts: 6243 Location: Bossier City
|
 Re: 1754 with 35 GTR speeds
I always laugh at the speed claims. I bet very, very few (any brand) rigs will break 30 with 1 man and a light load. I have ran with alot of rigs at the runs and I can run with most and out run some. Very few can pass me over distance and Im not running but 28-29 on my better days. Plus I make 2 of some of these guys and usually have my wife and her chit in the boat too which gets me down into 27-28mph range. So yeh alot of these claims are BS. But the GTR are probably on the high end of the speed scale and if that 1-1.5mph impresses you then by all means get you one.  I dont care if I ever run over 30. In fact I like to cruise at about 3600 rpms and 24-25mph. But what I really would like is to be able to carry a 3-4 man load at 28-30mph. Now that would be really nice. Think I may have to try the cam thing myself.
_________________ 18x48 Charles Leonard / 36PD
"I do think there is a Squatch in these woods"!!!!!
|
Wed Feb 15, 2012 12:24 am |
|
 |
bubba777
|
 Re: 1754 with 35 GTR speeds
And I am running. G nitro methanol, yea buddy
|
Wed Feb 15, 2012 1:36 am |
|
 |
Smoke
MMT 1000 Club
Joined: Fri Jan 23, 2009 1:27 pm Posts: 1095 Location: SW Michigan
|
 Re: 1754 with 35 GTR speeds
Another quick question on speed. I am going to mount a 35 MD hd on a 1648 grizzly mod vee .100 welded. What kind of speeds should I expect? I am thinking with two guys dogs & gear about 25mph. Is that fairly close?
Thanks for the input....................... Smoke
_________________ 1854 Prodigy Open HDR/Stage 3 mods Prodigy Boats Pro Staff BPS Swamp Staff Member Blackwater Marine LLC.
Quote classic by rangerp: "Red seemed to be enjoying herself, and I assume by the look on her face was about to hit the high-note and throw a locate as she treed the possum."
|
Wed Feb 15, 2012 6:29 am |
|
 |
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
 Re: 1754 with 35 GTR speeds
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Wed Feb 15, 2012 6:59 am |
|
 |
CLICKSTER
MMT 1000 Club
Joined: Sat Feb 12, 2011 4:08 pm Posts: 1552
|
 Re: 1754 with 35 GTR speeds
I have seen robert4wd's boat hit 29 with him and i in it. So i know for a fact his will run 30 by himself in it.
|
Wed Feb 15, 2012 7:58 am |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 1754 with 35 GTR speeds
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Wed Feb 15, 2012 8:09 am |
|
 |
CypressIslandBoyy
MMT Pro Member
Joined: Tue Jan 13, 2009 9:00 pm Posts: 131 Location: Morgan City, LA
|
 Re: 1754 with 35 GTR speeds
I have a 16-60 GD Boat and a 35GTR with only a MM Exhaust and i can run a constant 29-30 with me (180) and a light load. 2 ppl ( both about 180) can still run a constant 28. But my boat handles a load very well.
_________________ 16x60 GD Tank with a 35 GDSD
|
Wed Feb 15, 2012 8:27 am |
|
 |
highpockets
MMT Pro Member
Joined: Fri Mar 05, 2010 9:28 pm Posts: 50
|
 Re: 1754 with 35 GTR speeds
|
Wed Feb 15, 2012 7:48 pm |
|
 |
take'emgator
MMT Super Elite Member
Joined: Mon Oct 19, 2009 6:38 pm Posts: 10201 Location: SETX
|
 Re: 1754 with 35 GTR speeds
Robert4wd's rig ran 28-29 with me, him, my dog and a hunting load, It'll run 30 all day long with jsut a marshmellow exhaust, he has the boat in question on this thread. It can be done.
ON the other hand i carry a load at 31 consistant, ran 32 with me and 2 other guys with an icechest down a bayou not far from my house.
OUt ran a 25merc on the back of a 15ft. boat with a guy and his daughter coming home from a hunt one morning, i had 3 people in the boat full hunting load and walked him all the way back to the ramp
|
Wed Feb 15, 2012 8:30 pm |
|
 |
jakecologne
MMT F.E.
Joined: Thu Jun 10, 2010 2:57 pm Posts: 933 Location: Des Allemands
|
 1754 with 35 GTR speeds
Take em that's with your current mods?
_________________ 16x44 Hanko Skiff 35GTR
|
Wed Feb 15, 2012 9:04 pm |
|
 |
CAJUN OUTLAW
MMT 1000 Club
Joined: Thu Jan 22, 2009 10:37 pm Posts: 2577
|
 Re: 1754 with 35 GTR speeds
thats pretty impressive,a modded 35 walked away on a 25 merc?You sure you aint shittin me? bet a 15 hp wouldnt stand a chance against that beast. 
|
Wed Feb 15, 2012 9:13 pm |
|
 |
take'emgator
MMT Super Elite Member
Joined: Mon Oct 19, 2009 6:38 pm Posts: 10201 Location: SETX
|
 Re: 1754 with 35 GTR speeds
|
Thu Feb 16, 2012 6:00 am |
|
 |
|