I need to find someone who wants to make some easy money in their spare time. The bracket that holds the cable in place on the Pro Drive pin puller is made of a 1" long piece of 1-1/4x1-1/4 angle, 1/8 thick. It has a 5/16 hole drilled 1/4" from the edge of one leg, and a 3/16" hole drilled 3/8" from the edge if the other leg. It would help if I had a bunch of these already made up. I will pay 1.25 each for up to 100 if someone wants to make easy money in about an hour or so. Even easier if you have a drill press and a horizontal band saw. Material not supplied, but doesnt cost much.

I have both, but the shipping from S. Florida would probably not make it a worthwhile venture.

100 of these would prolly fit in a 10$ flat rate box from USPS.

Would 1.5 angle work, I have a bunch of that, also are you measuring the inside or outside of the angle iron

1.5 would work, measured from outside.

I'll see if my ag shop teacher will let me do that, I could donate the money to the shop program..... If you trust a kid working on them

Rod
You got my email, send me your tax # shipping address and how many you want and can get them knocked out prolly tomorrow or wednesday if you are ready for them

We keep 1.5 x 1/8 on hand most all the time