| Author |
Message |
|
forever draggin
MMT Elite Member
Joined: Tue Jan 13, 2009 7:10 pm
Posts: 6664
Location: in the marsh with a boat load full of dead hookers
|
 motor wont start battery is good
trim works, and i can hear clutch engage and disengage when the ign is on and the gear switch is flipped. turn key to start motor and nothing happens
jump positive and negative on starter soilonoid with screwdriver and motor spins
out of ideas, think maybe the ignition is bad?
|
| Tue Aug 04, 2009 6:12 pm |
|
|
|
schrieverboy
MMT F.E.
Joined: Tue Jul 21, 2009 7:06 am
Posts: 916
Location: South,La
|
Re: motor wont start how does your wiring look??? n e breaks or freys n e where
_________________
1648 w/ a 36 pd fpr on dat biatch
G-14 CLASSIFIED SKIFF ON DA WAY!!
Never try to educate someone who resists knowledge at all costs.
|
| Tue Aug 04, 2009 6:15 pm |
|
|
|
shallow water master
MMT 1000 Club
Joined: Tue Jun 16, 2009 8:27 pm
Posts: 1803
Location: Belle Chasse La.
|
Re: motor wont start
|
| Tue Aug 04, 2009 6:18 pm |
|
|
|
shallow water master
MMT 1000 Club
Joined: Tue Jun 16, 2009 8:27 pm
Posts: 1803
Location: Belle Chasse La.
|
Re: motor wont start
|
| Tue Aug 04, 2009 6:19 pm |
|
|
|
schrieverboy
MMT F.E.
Joined: Tue Jul 21, 2009 7:06 am
Posts: 916
Location: South,La
|
Re: motor wont start
_________________
1648 w/ a 36 pd fpr on dat biatch
G-14 CLASSIFIED SKIFF ON DA WAY!!
Never try to educate someone who resists knowledge at all costs.
|
| Tue Aug 04, 2009 6:21 pm |
|
|
|
muddiejeep
MMT F.E.
Joined: Tue Jan 13, 2009 6:24 pm
Posts: 761
Location: New Orleans, LA.
|
Re: motor wont start kill switch?
_________________
When in doubt, throttle out.
18x60 prodrive w/36 prodrive
|
| Tue Aug 04, 2009 6:24 pm |
|
|
|
schrieverboy
MMT F.E.
Joined: Tue Jul 21, 2009 7:06 am
Posts: 916
Location: South,La
|
Re: motor wont start motor shouldnt turn at all wit no kill switch
_________________
1648 w/ a 36 pd fpr on dat biatch
G-14 CLASSIFIED SKIFF ON DA WAY!!
Never try to educate someone who resists knowledge at all costs.
|
| Tue Aug 04, 2009 6:27 pm |
|
|
|
shallow water master
MMT 1000 Club
Joined: Tue Jun 16, 2009 8:27 pm
Posts: 1803
Location: Belle Chasse La.
|
Re: motor wont start
|
| Tue Aug 04, 2009 6:31 pm |
|
|
|
shallow water master
MMT 1000 Club
Joined: Tue Jun 16, 2009 8:27 pm
Posts: 1803
Location: Belle Chasse La.
|
Re: motor wont start it could be the stupid ass fuel cut off on the carb. they go bad and u can start it cuz it ect. ran and stop all fuel
|
| Tue Aug 04, 2009 6:33 pm |
|
|
|
muddiejeep
MMT F.E.
Joined: Tue Jan 13, 2009 6:24 pm
Posts: 761
Location: New Orleans, LA.
|
Re: motor wont start
_________________
When in doubt, throttle out.
18x60 prodrive w/36 prodrive
|
| Tue Aug 04, 2009 6:34 pm |
|
|
|
muddiejeep
MMT F.E.
Joined: Tue Jan 13, 2009 6:24 pm
Posts: 761
Location: New Orleans, LA.
|
Re: motor wont start what if the rev. limiter went out?
_________________
When in doubt, throttle out.
18x60 prodrive w/36 prodrive
|
| Tue Aug 04, 2009 6:35 pm |
|
|
|
schrieverboy
MMT F.E.
Joined: Tue Jul 21, 2009 7:06 am
Posts: 916
Location: South,La
|
Re: motor wont start key switch could be out
_________________
1648 w/ a 36 pd fpr on dat biatch
G-14 CLASSIFIED SKIFF ON DA WAY!!
Never try to educate someone who resists knowledge at all costs.
|
| Tue Aug 04, 2009 6:37 pm |
|
|
|
shallow water master
MMT 1000 Club
Joined: Tue Jun 16, 2009 8:27 pm
Posts: 1803
Location: Belle Chasse La.
|
Re: motor wont start
|
| Tue Aug 04, 2009 6:38 pm |
|
|
|
muddiejeep
MMT F.E.
Joined: Tue Jan 13, 2009 6:24 pm
Posts: 761
Location: New Orleans, LA.
|
Re: motor wont start loose wire on key switch.
_________________
When in doubt, throttle out.
18x60 prodrive w/36 prodrive
|
| Tue Aug 04, 2009 6:38 pm |
|
|
|
forever draggin
MMT Elite Member
Joined: Tue Jan 13, 2009 7:10 pm
Posts: 6664
Location: in the marsh with a boat load full of dead hookers
|
Re: motor wont start dont think the flywheel key is sheared because if u jump it at the soilonoid itll run.
checked all fuses and connectins- they look fine.
from what i see wiring looks great
ign switch could be out, but i doubt it because when u turn it half way u can work trim and clutch
it does have gas, but even if it didnt it would still spin over
kill switch is on
dont know how to bypass the rev limitor to eliminate that as the problem
|
| Tue Aug 04, 2009 6:59 pm |
|
|
|
shallow water master
MMT 1000 Club
Joined: Tue Jun 16, 2009 8:27 pm
Posts: 1803
Location: Belle Chasse La.
|
Re: motor wont start
|
| Tue Aug 04, 2009 7:01 pm |
|
|
|
schrieverboy
MMT F.E.
Joined: Tue Jul 21, 2009 7:06 am
Posts: 916
Location: South,La
|
Re: motor wont start check for a voltage drop when u go to turn it over
_________________
1648 w/ a 36 pd fpr on dat biatch
G-14 CLASSIFIED SKIFF ON DA WAY!!
Never try to educate someone who resists knowledge at all costs.
|
| Tue Aug 04, 2009 7:03 pm |
|
|
|
muddiejeep
MMT F.E.
Joined: Tue Jan 13, 2009 6:24 pm
Posts: 761
Location: New Orleans, LA.
|
Re: motor wont start I think you cut a green wire
_________________
When in doubt, throttle out.
18x60 prodrive w/36 prodrive
|
| Tue Aug 04, 2009 7:04 pm |
|
|
|
forever draggin
MMT Elite Member
Joined: Tue Jan 13, 2009 7:10 pm
Posts: 6664
Location: in the marsh with a boat load full of dead hookers
|
Re: motor wont start i stated that when jumping the soilonoid that the motor runs, it doesnt run, it just spins but acts like it doest get either fuel or fire
|
| Tue Aug 04, 2009 7:16 pm |
|
|
|
schrieverboy
MMT F.E.
Joined: Tue Jul 21, 2009 7:06 am
Posts: 916
Location: South,La
|
Re: motor wont start no fouled plugs huh??
_________________
1648 w/ a 36 pd fpr on dat biatch
G-14 CLASSIFIED SKIFF ON DA WAY!!
Never try to educate someone who resists knowledge at all costs.
|
| Tue Aug 04, 2009 7:21 pm |
|
|
|
SwampSnyper
MMT F.E.
Joined: Tue Jan 13, 2009 8:43 pm
Posts: 823
Location: SORRENTO, LA
|
Re: motor wont start Either the wires came loose on the back of the kill switch or ignition, but I'm willing to bet rev limiter. I think just cutting the green will work it, but I would cut them all. Bet it starts up then.
_________________
1948 Aucion's SS Edition Bateau with a stock 35GTR
|
| Tue Aug 04, 2009 7:26 pm |
|
|
|
backwaterballer
MMT Addict
Joined: Sat Feb 21, 2009 9:39 pm
Posts: 715
Location: Pearland Tx
|
Re: motor wont start Chech the ground for your coils won't gave fire if it has a bad connection nut will still spin
_________________
23 hp gdlt pushin the 14ft NoWeld "aka" the black pearl
35 hp gdsd pushin a 16/60 go devil boat
|
| Tue Aug 04, 2009 7:44 pm |
|
|
|
PaulDarensbourg
MMT Addict
Joined: Fri Jan 23, 2009 11:07 am
Posts: 602
Location: Baton Rouge
|
Re: motor wont start Wo wo wo, don't start cutting shit, call me. Pretty sure I know what the problem is.
|
| Tue Aug 04, 2009 7:45 pm |
|
|
|
Gigafowl
MMT Elite Member
Joined: Tue Jan 13, 2009 7:19 pm
Posts: 6441
Location: Trinity Bay - Texas
|
Re: motor wont start Luke 6:39
_________________
Eat - Sleep - Hunt ! ! !
"It is good to have an end to journey toward; but
it is the journey that matters, in the end."
|
| Tue Aug 04, 2009 7:49 pm |
|
|
|
PaulDarensbourg
MMT Addict
Joined: Fri Jan 23, 2009 11:07 am
Posts: 602
Location: Baton Rouge
|
Re: motor wont start
|
| Tue Aug 04, 2009 8:06 pm |
|
|
|
craig
MMT Elite Member
Joined: Tue Jan 13, 2009 7:53 pm
Posts: 7515
Location: Chauvin
|
Re: motor wont start
_________________
1750 GatorTail Extreme/Stage 3 37 GTR HD
Procrastination is a lot like masturbation. Sure it sounds great at the time but, in the end your only f--k--g yourself.
|
| Tue Aug 04, 2009 8:11 pm |
|
|
|
PaulDarensbourg
MMT Addict
Joined: Fri Jan 23, 2009 11:07 am
Posts: 602
Location: Baton Rouge
|
Re: motor wont start It's fixed, just a wire connector.
|
| Tue Aug 04, 2009 8:14 pm |
|
|
|
forever draggin
MMT Elite Member
Joined: Tue Jan 13, 2009 7:10 pm
Posts: 6664
Location: in the marsh with a boat load full of dead hookers
|
Re: motor wont start yeah had a bad wire crimp on back of the starter silnoid. everything is good to go
|
| Tue Aug 04, 2009 9:26 pm |
|
|
|
schrieverboy
MMT F.E.
Joined: Tue Jul 21, 2009 7:06 am
Posts: 916
Location: South,La
|
Re: motor wont start good deal 
_________________
1648 w/ a 36 pd fpr on dat biatch
G-14 CLASSIFIED SKIFF ON DA WAY!!
Never try to educate someone who resists knowledge at all costs.
|
| Wed Aug 05, 2009 6:34 am |
|
|
|
coondik
|
Re: motor wont start jiggle, jiggle - vroom. vroom 
|
| Wed Aug 05, 2009 6:45 am |
|
|
|
deadbird8
MMT 1000 Club
Joined: Wed Feb 04, 2009 7:50 pm
Posts: 3833
Location: Old East Dallas, Texas
|
Re: motor wont start
_________________
Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that
|
| Wed Aug 05, 2009 8:34 am |
|
|
|
LA OUTLAW
MMT 1000 Club
Joined: Mon Mar 02, 2009 9:25 pm
Posts: 1096
Location: Morgan City
|
Re: motor wont start
_________________
1754 GT EXTREME 37EFI
|
| Wed Aug 05, 2009 7:06 pm |
|
|
|
schrieverboy
MMT F.E.
Joined: Tue Jul 21, 2009 7:06 am
Posts: 916
Location: South,La
|
Re: motor wont start maybe some of us just had some sh!tty wiring before
_________________
1648 w/ a 36 pd fpr on dat biatch
G-14 CLASSIFIED SKIFF ON DA WAY!!
Never try to educate someone who resists knowledge at all costs.
|
| Wed Aug 05, 2009 7:40 pm |
|
|
|
bayouboy
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm
Posts: 5376
Location: Venice, La
|
Re: motor wont start
|
| Wed Aug 05, 2009 7:50 pm |
|
|
|
schrieverboy
MMT F.E.
Joined: Tue Jul 21, 2009 7:06 am
Posts: 916
Location: South,La
|
Re: motor wont start n e thing is possible.... its hard to diagnose stuff when you are not there troubleshooting yourself... but you have to start wit da simplist most common sh!t first
_________________
1648 w/ a 36 pd fpr on dat biatch
G-14 CLASSIFIED SKIFF ON DA WAY!!
Never try to educate someone who resists knowledge at all costs.
|
| Wed Aug 05, 2009 7:53 pm |
|
|
|
Mitschke
MMT F.E.
Joined: Tue Jan 13, 2009 7:18 pm
Posts: 971
|
Re: motor wont start
|
| Wed Aug 05, 2009 7:56 pm |
|
|
|
schrieverboy
MMT F.E.
Joined: Tue Jul 21, 2009 7:06 am
Posts: 916
Location: South,La
|
Re: motor wont start nothing in dat situation... i thought it was funny at da time.... ass
_________________
1648 w/ a 36 pd fpr on dat biatch
G-14 CLASSIFIED SKIFF ON DA WAY!!
Never try to educate someone who resists knowledge at all costs.
|
| Wed Aug 05, 2009 8:00 pm |
|
|
|
bayouboy
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm
Posts: 5376
Location: Venice, La
|
Re: motor wont start AHhhhhooooooooooo! He said your an ass Mitschke! you gonna take dat? lol
|
| Wed Aug 05, 2009 8:36 pm |
|
|
|
River
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:34 am
Posts: 1092
Location: Unaffiliated, SETX group has caused me to renounce my Texas Citizenship
|
Re: motor wont start Holy Crap, I guess I missed this Gem.
_________________
"Democracy is two wolves and a lamb voting on what to have for lunch.
Liberty is a well-armed lamb contesting the outcome of the vote."-Benjamin Franklin
|
| Mon Aug 10, 2009 8:57 am |
|
|
|
POKER1
MMT Elite Member
Joined: Tue Jan 13, 2009 8:02 pm
Posts: 6243
Location: Bossier City
|
Re: motor wont start Me too. I think they covered everything but the Angle of the Dangle on this one.
_________________
18x48 Charles Leonard / 36PD
"I do think there is a Squatch in these woods"!!!!!
|
| Mon Aug 10, 2009 9:50 am |
|
|
|
