MM Brand: Gator tail
Horsepower: 35+
Boat Brand: Garrett Pearce
Boat Size: 1848
Boat Layout: Open floor with 4' front deck and hunt deck.

Speeds | Shallow Water: unknown
Speeds | Deep Water: 38
Total Boat Load With Gear Etc: ran by myself with 18 gallons of gas
Conditions Tested In: slick calm no current.

Comments: boat performs excellent in any thing I've put it threw from lilies to mud to grass and everything in between
Motor has been modded to a stage 3 but even with just my stock motor this boat would perform with a load or unloaded. Biggest load I've had so far has been 120qt 90qt and 35 qt ice chest 25 gallons of gas hunting gear for 2 ppl and stuff for a weekend at te camp as the boat will jump on step and run like nothing to it.
Anyone that wants a boat built that will actually perform like expected to give him a shout and hell get you something you want.

Strange thing with all that horsepower and awesome boat your cousin will still leave you behind in all you mention with his stock ProDrive and Charles Lenard Skiff. Except open water speeds.

Brian need to get off that crack pipe he think that prodrive gonna out do my boat

I told him whenever he's ready for me to show him how it's done we can go run them threw anything he wants

You know he don't play. He only uses to hunt and fish.

Me an Keith got him itching to mod that new motor like ours.

I'll find him one day frogging

Yeah he called me the other day asking me what he should do to it

Man that thing will hail ass

Sent from my DROID BIONIC using Tapatalk 2

I told him to go visit Calen. He would hook him up.

He will talk about it and never do it

Who did your mods? Is a stage 3 everything modified except the block? Are you running a stock prop?

I got parts from Calen and put everything together myself. When you do block work is what makes a stage 3. Stock prop I wouldn't waste my time or money getting someone to try and build a prop stock works just fine.

.020 over stock pistons is considered "block work"?
I guess mine is a stage 3 too.

Machine work is machine work. I got something else bout to be put in play as far as pistons

My loud muffler makes mine a stage 3. Just the loudness gives it 10 hp lol

230 lbs compression. = bent push rods

265 = parts every where lol

120 rods and stock heads with hoyts cam. You know what compression that would give me roughly. Anyone

That's how much your old motors had?

First one had more than that we put stock heads to get it down to 265.

Garrett that's what I had on my second motor if my memory is correct around 220-235 around that

No wonder why they flew to pieces!

My old engine had comp. numbers that high and I only bent push rods if I revved 5600+.

I want to get it down to around 200-210. Detonating pretty bad right now

What fuel you ran craig

Yea that's what I thought. I ran 93 with boost which brought it up to like 105. But still detonating pretty bad so I want to drop compression and try some other stuff

Nah... You really don't notice any difference.

Don't allow it to detonate.

Mine lasted 10 minutes running wide open on 93 alone.

What's the remedy for detonation

Lower compression.

Yea ima get that compressikn down