|
It is currently Mon Mar 23, 2026 2:13 pm
|
|
Page 1 of 1
|
[ 7 posts ] |
|
| Author |
Message |
|
Mudhead
MMT Pro Member
Joined: Mon Feb 15, 2010 10:07 am
Posts: 136
|
 Modded 32PD, which carb? Running a 32 PD with BPS cam, heads decked .055, valve work, and a gutted exhaust. On an 1848 Geaux, I'm running a strong 30 solo and carry a load well.
The problem I'm having is A., it does not idle well, especially under load, B, the throttle response on the low end is awful, and C, if I'm trying to get unstuck, I have to piss around with the throttle or it dies as soon as I'm in gear and have to restart it.
My 32 carb is getting tossed...will I notice any difference with a 36 carb? I'm also looking at a Mikuni hsr42. I've heard some guys are running the 44mm without an accelerator pump, and have had success.
Just looking for ideas, as 775 is a lot of dough right now.
_________________
Geaux 1848, 32PD w/stage III case gasket and decked valve covers
|
| Tue Mar 12, 2013 1:38 pm |
|
|
|
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
|
Re: Modded 32PD, which carb? The 36 carb runs very well, IMO, with the couple of tricks that db8 has posted on here several times. My carb idles under 1000, 700ish in gear, and gets off idle and rolling pretty smooth.
The other widely available option is the mikuni. Plenty of other carbs available to tinker with, but no other kits that I am aware of.
|
| Tue Mar 12, 2013 5:53 pm |
|
|
|
renovator
MMT Pro Member
Joined: Sun Jun 03, 2012 4:41 pm
Posts: 485
|
Re: Modded 32PD, which carb? I have a stock pd 36hp carb if your interested.
_________________
1648 gd hull flying in front of a stage 3 with fpr
|
| Tue Mar 12, 2013 6:53 pm |
|
|
|
shooter
MMT Pro Member
Joined: Wed Jul 21, 2010 5:59 pm
Posts: 406
|
Re: Modded 32PD, which carb?
_________________
32 PD with EVT cam, decked heads, shaved pistons and not enough sense to leave things alone!
|
| Tue Mar 12, 2013 7:26 pm |
|
|
|
Mudhead
MMT Pro Member
Joined: Mon Feb 15, 2010 10:07 am
Posts: 136
|
Re: Modded 32PD, which carb? I don't have the tools to drill out the jets without some serious amounts of duct tape and prayers!
_________________
Geaux 1848, 32PD w/stage III case gasket and decked valve covers
|
| Wed Mar 13, 2013 10:53 am |
|
|
|
50fps
MMT 1000 Club
Joined: Tue Jan 13, 2009 6:42 pm
Posts: 2377
Location: West Coast Wisconsin
|
Re: Modded 32PD, which carb? Find ya an EVT intake and have the flange changed to accept an S&S Super E carb.
|
| Sat Mar 16, 2013 7:36 am |
|
|
|
Mudhead
MMT Pro Member
Joined: Mon Feb 15, 2010 10:07 am
Posts: 136
|
Re: Modded 32PD, which carb?
_________________
Geaux 1848, 32PD w/stage III case gasket and decked valve covers
|
| Sat Mar 16, 2013 11:28 am |
|
|
|
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
