Author |
Message |
willett
MMT Sponsor
Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX
|
 WC CUSTOM 1740 "HYBRID V RAKE" with 25 GTR Full Review
WC CUSTOM 17' 6" Long 40" Wide 3/16 Thick Bottom 24" Tall 1/8" Sides "Hybrid" V Bow Tall Transom Rear Hunt Deck Wide open floor plan. Long Shallow Box in "Extended Deck" Storage Hatch in front Deck
Powered by brand new 25hp EFI Long Shaft Gator Tail with Reverse
This boat will be one of our shop/demo boats.
We have had a few customers ask about the "Hybrid" V Bows so I figured I better try/do it to one of my own boats before jumping into something on a customers boat. For the first one we've done I think it's pretty bad ass looking. ESPECIALLY with such a narrow boat. With that said, it was a B***H with narrow 3/16 bottom. 1/8 thick would have made it a little easier but it would defintely be a lot easier on a wider boat.
Ran this boat at the Caddo Lake Fun Run on the weekend of June 1st.
First time dropping it in the water I had myself (190), full K2 30 qt cooler to sit on while driving, rear cranking battery, full 6 gallon tank in front, 60 piece tool set in front hatch along with 4 life jackets and a throw cushion, and misc items in the long shallow box. Out of the wind- Deep Water Speeds: 25-26 mph Shallow Water Speeds: 26-27 mph
Second time dropping it in the water put about 4 hours on it. I had myself (190), first lady (150), full K2 30 qt cooler to sit on while driving, full 30 qt igloo cooler for her to sit on, rear cranking battery, full 6 gallon tank and full 2 gallon aux tank in front, 60 piece tool set in front hatch along with 4 life jackets and a throw cushion, and misc items in the long shallow box. In or Out of the Wind- Deep water Speeds: 22-23 mph Shallow Water Speeds: 23-24 mph Sorry no GPS pic
The V Rake did what it was supposed to and made the ride very smooth. Depending on how you hit the waves/wake it will throw water over the bow and you will get wet. It doesn't happene every time, but it DOES happen. I would assume that on a wider boat it would help keep the water down due to more surface area because keep in mind this is only a 40" wide bottom. I am going to attempt to add some "spray rails" under the rake to see if it helps keep the water down as long as it doesn't look horrible. The next two boats we build will be 54" wide so I will test my assumption then.
Pics:
_________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com
WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS
|
Mon Jun 03, 2013 7:31 pm |
|
 |
mizzippi jb
MMT Elite Member
Joined: Wed Sep 21, 2011 2:53 pm Posts: 5077 Location: The duck Mecca called Ga!
|
 Re: WC CUSTOM 1740 "HYBRID V RAKE" with 25 GTR Full Review
Looks awesome! Can't wait to see it with some camo on it.
_________________ HOTSAUCE170 wrote: I've never gone to Seminole for the amenities/luxury the two reasons I go down there are to kill shit and get fucked up with like minded individuals aka OG'S. If you want to swirl wine and stay in a room where politics and investment diversity are discussed (with no roaches) lake lanier is near Atlanta. If you wanna have an awesome time and maybe stay in a room where children were conceived on one side and someone got stabbed over an 8-ball on the other come on down I got a can of raid.
|
Mon Jun 03, 2013 7:37 pm |
|
 |
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm Posts: 7064 Location: Mallard country
|
 Re: WC CUSTOM 1740 "HYBRID V RAKE" with 25 GTR Full Review
Is a nice looking rig! How did it cut threw the waves?
|
Mon Jun 03, 2013 7:46 pm |
|
 |
calphil
MMT 1000 Club
Joined: Sun Feb 26, 2012 10:49 pm Posts: 1715 Location: Kingwood,TX
|
 Re: WC CUSTOM 1740 "HYBRID V RAKE" with 25 GTR Full Review
Very nice Willet..liking that layout
Sent from... who cares..
_________________ 1744 WC Custom 25 GTR
|
Tue Jun 04, 2013 5:53 am |
|
 |
cr244
MMT 1000 Club
Joined: Sat Jun 16, 2012 9:43 am Posts: 1504 Location: Watoola, Alabama
|
 Re: WC CUSTOM 1740 "HYBRID V RAKE" with 25 GTR Full Review
goodlooking build pete. v rake is nice
|
Tue Jun 04, 2013 7:21 am |
|
 |
BKScripto
MMT Pro Member
Joined: Fri Jan 11, 2013 8:23 am Posts: 482
|
 Re: WC CUSTOM 1740 "HYBRID V RAKE" with 25 GTR Full Review
Very, very cool boat and good concept. I actually did sort of the same thing on my build. I'm hoping it'll make the ride a lot smoother.
Did you find the ride is noticeably different than with a true flat?
|
Tue Jun 04, 2013 7:41 am |
|
 |
willett
MMT Sponsor
Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX
|
 Re: WC CUSTOM 1740 "HYBRID V RAKE" with 25 GTR Full Review
It cuts the waves really well but does soak you from time to time. But it's super smooth. The bow doesn't slap the water like on a true flat.
_________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com
WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS
|
Tue Jun 04, 2013 8:12 am |
|
 |
T10
MMT Pro Member
Joined: Wed Apr 10, 2013 10:53 am Posts: 257 Location: ETX
|
 Re: WC CUSTOM 1740 "HYBRID V RAKE" with 25 GTR Full Review
very cool design. ill be interested to see how that v rake does on the 54" wide bottom.
_________________ WC Custom 1854 huntdeck pushed by MB7000
|
Tue Jun 04, 2013 8:30 am |
|
 |
Quackhead62
MMT F.E.
Joined: Fri Nov 30, 2012 7:47 pm Posts: 931 Location: Maurice,La
|
 Re: WC CUSTOM 1740 "HYBRID V RAKE" with 25 GTR Full Review
that is a really good looking design. I like the extra storage in the shallow tray in the front deck of the boat. Most flats soak you from time to time but it don't seem to bother too many people. A SD boat will never cut though waves an chop like a bay boat. I really do like the look of it post some pix after you get it camo painted
_________________ Stage 2 36 HP Pro-Drive FPR W/ Bayou Boys Custom Skeg,Cave Plate,and Weed Cutter with MAC Exhaust Pushing a 17X54 Pro-Drive X-Series boat
|
Tue Jun 04, 2013 10:21 am |
|
 |
MNGunner
MMT 1000 Club
Joined: Mon Jan 09, 2012 8:56 pm Posts: 2623 Location: Minnesota
|
 Re: WC CUSTOM 1740 "HYBRID V RAKE" with 25 GTR Full Review
Looks awesome! I have yet to hear someone say they wish they hadn't gotten the Hybrid front. I know I really like mine. Only disadvantage I see is cost.
Great job!
_________________ 1754 Gator Trax Hybrid Hunt Deck with GTR35
|
Tue Jun 04, 2013 11:43 am |
|
 |
willett
MMT Sponsor
Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX
|
 Re: WC CUSTOM 1740 "HYBRID V RAKE" with 25 GTR Full Review
MNGunner - how wide is your bottom?
Be honest, Do you get soaked at times depending on how you hit the wave?
_________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com
WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS
|
Tue Jun 04, 2013 11:55 am |
|
 |
Jamie B.
MMT 1000 Club
Joined: Tue May 19, 2009 9:48 am Posts: 2688
|
 Re: WC CUSTOM 1740 "HYBRID V RAKE" with 25 GTR Full Review
Willet, from the widest point of the boat to the front where the sides end, how much does it close up?
|
Tue Jun 04, 2013 12:05 pm |
|
 |
pearl river outlaw
MMT 1000 Club
Joined: Wed Jul 28, 2010 9:12 am Posts: 1407 Location: Louisville Ms
|
 Re: WC CUSTOM 1740 "HYBRID V RAKE" with 25 GTR Full Review
Man I like that!
_________________ Back Yard Bullshit 1848 with Delta stage II cam & heads, MAC, with a Mikuni juice pump.
No I wasn't talking about you but if the shoe fits lace that bitch up & wear it!!!!
|
Tue Jun 04, 2013 12:07 pm |
|
 |
Jamie B.
MMT 1000 Club
Joined: Tue May 19, 2009 9:48 am Posts: 2688
|
 Re: WC CUSTOM 1740 "HYBRID V RAKE" with 25 GTR Full Review
Also how much does the mod v pertrude out from the bottom. (Depth wise). This might be the reason for taking the spray over the front. The deeper the Mod V, the more it pushed the water to the side vs over the bow.
|
Tue Jun 04, 2013 12:12 pm |
|
 |
Ducaholic
MMT 1000 Club
Joined: Wed Feb 10, 2010 3:28 pm Posts: 1014 Location: Avoyelles Parish
|
 Re: WC CUSTOM 1740
_________________ 18X44 Geaux Custon Powered By MB 4500 BD
|
Tue Jun 04, 2013 12:21 pm |
|
 |
MNGunner
MMT 1000 Club
Joined: Mon Jan 09, 2012 8:56 pm Posts: 2623 Location: Minnesota
|
 Re: WC CUSTOM 1740
_________________ 1754 Gator Trax Hybrid Hunt Deck with GTR35
|
Tue Jun 04, 2013 12:37 pm |
|
 |
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: WC CUSTOM 1740 "HYBRID V RAKE" with 25 GTR Full Review
Boat looked good this weekend, Pete. Glad you made it out.
I would have thought you were running better than that, it was running good!
|
Tue Jun 04, 2013 12:40 pm |
|
 |
willett
MMT Sponsor
Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX
|
 Re: WC CUSTOM 1740 "HYBRID V RAKE" with 25 GTR Full Review
_________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com
WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS
|
Tue Jun 04, 2013 5:15 pm |
|
 |
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: WC CUSTOM 1740 "HYBRID V RAKE" with 25 GTR Full Review
Sure jumped out and ran, buddy! Looked good and ran good! I like what yall are doing down there at WC Customs. Keep up the good work!
|
Tue Jun 04, 2013 6:12 pm |
|
 |
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm Posts: 7064 Location: Mallard country
|
 Re: WC CUSTOM 1740 "HYBRID V RAKE" with 25 GTR Full Review
Should fly with a 35!
|
Tue Jun 04, 2013 6:22 pm |
|
 |
MNGunner
MMT 1000 Club
Joined: Mon Jan 09, 2012 8:56 pm Posts: 2623 Location: Minnesota
|
 Re: WC CUSTOM 1740
_________________ 1754 Gator Trax Hybrid Hunt Deck with GTR35
|
Tue Jun 04, 2013 8:33 pm |
|
 |
|