| Author |
Message |
|
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm
Posts: 763
|
 Re: Boat on the loose Got the boat back today from gator tail they fixed her up went run it only thing I notice on take off it wants to miss and bogg down and at wide open after running it it will hit 4400 and start to go down to like 4250 so I stop and take off again it will hit 4400 stay for a lil while and start to drop and you can hear it it's not just a tach 4250 was the lowest it went I tried a bunch of times and did same thing each time
_________________
2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
| Thu Apr 03, 2014 3:29 am |
|
|
|
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm
Posts: 763
|
Re: Boat on the loose Ima change the fuel filter cause the boat was upside down so no telling what kinda trash got loose and might as well take carb off and make sure jets aren't clogged up
_________________
2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
| Thu Apr 03, 2014 5:38 am |
|
|
|
LA Prop
MMT Sponsor
Joined: Sat Feb 01, 2014 6:31 pm
Posts: 1008
|
Re: Boat on the loose
_________________
20' homemade skiff with a stage 2 gtr
|
| Thu Apr 03, 2014 1:56 pm |
|
|
|
msm8281
MMT Elite Member
Joined: Fri Oct 09, 2009 1:50 pm
Posts: 9673
Location: New Iberia, La.
|
Re: Boat on the loose I thought this was about me. Mine came untied at marsh field today. The first time this ever happened to me in 20 yrs of boating on my own.
BTW the water is still cold:lol:
|
| Thu Apr 03, 2014 2:08 pm |
|
|
|
dog walker
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm
Posts: 5282
Location: Meraux,La.
|
Re: Boat on the loose A couple years ago I took a tight turn on a small bridge and knocked the right tire off the trailer,snapped the spindle. It was a costly mistake. Last year my buddy that always gave me shit over it hit the same curb and blew out his right tire.
|
| Thu Apr 03, 2014 4:38 pm |
|
|
|
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm
Posts: 763
|
Re: Boat on the loose Glad to see I'm not the only one to hit a curb before
_________________
2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
| Thu Apr 03, 2014 5:18 pm |
|
|
|
THE TANK
MMT 1000 Club
Joined: Wed Mar 04, 2009 7:34 pm
Posts: 1080
Location: Coteau Homles, La
|
Re: Boat on the loose
|
| Thu Apr 03, 2014 6:20 pm |
|
|
|
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm
Posts: 763
|
Re: Boat on the loose Nah it ran decent yesterday 24.5. New top speed
_________________
2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
| Thu Apr 03, 2014 6:26 pm |
|
|
|
THE TANK
MMT 1000 Club
Joined: Wed Mar 04, 2009 7:34 pm
Posts: 1080
Location: Coteau Homles, La
|
Re: Boat on the loose
|
| Thu Apr 03, 2014 6:33 pm |
|
|
|
LA Prop
MMT Sponsor
Joined: Sat Feb 01, 2014 6:31 pm
Posts: 1008
|
Re: Boat on the loose
_________________
20' homemade skiff with a stage 2 gtr
|
| Thu Apr 03, 2014 9:39 pm |
|
|
|
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm
Posts: 763
|
Re: Boat on the loose Ok you got me i got it up to 25
_________________
2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
| Fri Apr 04, 2014 3:51 am |
|
|
|
LA Prop
MMT Sponsor
Joined: Sat Feb 01, 2014 6:31 pm
Posts: 1008
|
Re: Boat on the loose
_________________
20' homemade skiff with a stage 2 gtr
|
| Fri Apr 04, 2014 5:53 am |
|
|
|
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm
Posts: 763
|
Re: Boat on the loose Ma shit ever does 24 by ma self I.lm pulling the plug and Sinking it on the spot
_________________
2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
| Fri Apr 04, 2014 5:56 am |
|
|
|
