It is currently Sun Jun 29, 2025 1:22 am




Reply to topic  [ 15 posts ] 
 URGENT ANNOUNCEMENT - HEVI-Metal® and HEVI-Steel® shotshells 
Author Message
MMT 1000 Club

Joined: Thu Dec 29, 2011 10:46 pm
Posts: 2342
Location: Mandeville, LA
Post URGENT ANNOUNCEMENT - HEVI-Metal® and HEVI-Steel® shotshells
I got this via email this morning from HEVI-Shot....figured I needed to pass it along:

HEVI Shot
15 hrs ·
URGENT ANNOUNCEMENT FROM HEVI-Shot
At temperatures below freezing, our 12-gauge, 3-inch HEVI-Metal® and HEVI-Steel® shotshell wads may crack on ignition. This may cause a “squib load”, with an off sound and reduced power.
While this squib load will not damage your gun in any way, it can result in a wad stuck in your barrel, because the force of some of these shells may not be strong enough to push the wad all the way out of the muzzle.
The danger comes if you fire again without clearing a stuck wad from your barrel. This can cause barrel damage or injury. If you hear an off sound with no power, please stop shooting! First, unload your gun – and then check your barrel for obstructions before you fire again!
Please do not shoot these shotshells. Instead, please contact us for replacement shells. We have fixed this problem in current production.
After we were contacted about squib loads, we began an intensive investigation that led to an understanding of the problem by the evening of 19 November. We want to get this notice out to our customers immediately. Please share it with your hunting friends.
The wads we bought between July and mid-November used a low-density polyethylene plastic. We switched yesterday to a linear low density polyethylene, which performs safely in all weather, including very cold weather. To understand the difference, please go to:
http://www.primepolymer.co.jp/…/technol…/material/pe/05.html
Only 12-gauge, 3-inch HEVI-Steel or HEVI-Metal® shotshells with these lot numbers may have the problem:
201576 – 201584 301571 – 301609 401335 – 401345 500001 - 500016
201600 – 201637 301643 – 301659 401381 - 401422
201640 – 201659 301672 – 301689 401437 - 401463
201665 – 201671 301698 – 301701 401466 - 401486
201677 – 201680 301713 – 301722 401489 - 401504
201683 – 201699 301725 – 301726 401507 - 401519
201702 – 201722 301730 - 301734
201732 – 201736
The lot number is stamped on the inside top flap of your box of shotshells.
Our highest priories are your safety and your satisfaction with our products. We will do everything we can to get you the product you deserve if you contact us for replacement shells. For your safety, when you contact us we will arrange to have UPS pick up your unused shells (please put them in a

shippable cardboard box such as our master carton) at no charge to you, and we will ship your replacement shells to you at no charge. Contact Kelly Sorensen, VP of Sales and Marketing by phone: 541.367.3522, or by email: sales@hevishot.com.

Ralph Nauman
CEO

Here are the links:

http://www.hevishot.com/media/Letter_to ... -20-14.pdf

https://www.facebook.com/hevishotammo/p ... 4056530148


Fri Nov 21, 2014 9:37 am
Profile
MMT 1000 Club
User avatar

Joined: Tue Jan 21, 2014 2:52 pm
Posts: 2806
Location: Minnesota
Post Re: URGENT ANNOUNCEMENT - HEVI-Metal® and HEVI-Steel® shotsh
this explains a lot - last 2 guys I hunted with in cold weather used hevi-metal shells and we just chalked it up to poor marksmanship, but they were ineffective.

probably 100 guys that could say different, but i used more shells on clean up shots for them than usual :oops:

_________________
that's going itch when it dries


Fri Nov 21, 2014 10:15 am
Profile
MMT 1000 Club
User avatar

Joined: Tue Jun 05, 2012 7:25 pm
Posts: 4205
Location: St. Amant, LA
Post Re: URGENT ANNOUNCEMENT - HEVI-Metal® and HEVI-Steel® shotsh
Ha! 30$ for 10 shells and they can't design a wad to work under freezing temps?

Junk.


Fri Nov 21, 2014 10:31 am
Profile
MMT 1000 Club

Joined: Thu Dec 29, 2011 10:46 pm
Posts: 2342
Location: Mandeville, LA
Post Re: URGENT ANNOUNCEMENT - HEVI-Metal® and HEVI-Steel® shotsh


Fri Nov 21, 2014 11:01 am
Profile
MMT 1000 Club
User avatar

Joined: Tue Jan 21, 2014 2:52 pm
Posts: 2806
Location: Minnesota
Post Re: URGENT ANNOUNCEMENT - HEVI-Metal® and HEVI-Steel® shotsh
they are still very expensive/top end shells - to only have pellets bounce off of or not even reach the birds.

_________________
that's going itch when it dries


Fri Nov 21, 2014 11:06 am
Profile
MMT 1000 Club
User avatar

Joined: Tue Jun 05, 2012 7:25 pm
Posts: 4205
Location: St. Amant, LA
Post Re: URGENT ANNOUNCEMENT - HEVI-Metal® and HEVI-Steel® shotsh


Fri Nov 21, 2014 1:48 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Apr 17, 2013 5:15 pm
Posts: 2032
Post Re: URGENT ANNOUNCEMENT - HEVI-Metal® and HEVI-Steel® shotsh
Definitely way too expensive for that shit to be happening. I get that mistakes will be made but for 30 bucks a box....come on now


Fri Nov 21, 2014 2:30 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Apr 17, 2013 5:15 pm
Posts: 2032
Post Re: URGENT ANNOUNCEMENT - HEVI-Metal® and HEVI-Steel® shotsh
Didnt Remington Hyper Sonics have the same issue a few years back too?


Fri Nov 21, 2014 2:31 pm
Profile
MMT 1000 Club
User avatar

Joined: Tue Jan 21, 2014 2:52 pm
Posts: 2806
Location: Minnesota
Post Re: URGENT ANNOUNCEMENT - HEVI-Metal® and HEVI-Steel® shotsh
i think the Remingtons were blowing the shot cup (wad) apart or was that winchesters?

_________________
that's going itch when it dries


Fri Nov 21, 2014 3:20 pm
Profile
MMT Pro Member
User avatar

Joined: Thu May 02, 2013 10:45 am
Posts: 228
Location: South Alabama
Post Re: URGENT ANNOUNCEMENT - HEVI-Metal® and HEVI-Steel® shotsh


Fri Nov 21, 2014 3:50 pm
Profile
MMT 1000 Club

Joined: Wed Jan 18, 2012 7:21 pm
Posts: 2207
Location: North Alabama
Post Re: URGENT ANNOUNCEMENT - HEVI-Metal® and HEVI-Steel® shotsh
Got lucky my case was lot code 401410. In all the for years I've shot them, they have been great. I know this shit happens, but atleast they are doing there part in making it right. Really sucks is during season

_________________
2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD

2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD


Fri Nov 21, 2014 7:03 pm
Profile
MMT Addict
User avatar

Joined: Wed Jan 26, 2011 1:28 pm
Posts: 515
Location: setx
Post Re: URGENT ANNOUNCEMENT - HEVI-Metal® and HEVI-Steel® shotsh
My case falls in the recall. Been shooting the hevi steel and haven't had a problem but of course this is setx so not many freezing days.

_________________
1754GT 35GTR


Fri Nov 21, 2014 8:28 pm
Profile
MMT 1000 Club

Joined: Thu Dec 29, 2011 10:46 pm
Posts: 2342
Location: Mandeville, LA
Post Re: URGENT ANNOUNCEMENT - HEVI-Metal® and HEVI-Steel® shotsh
Yea, apparently it's only in extreme cold weather that their having issues.....but you never know. They're offering to replace them, probably worth it just for the peace of mind.


Fri Nov 21, 2014 9:45 pm
Profile
MMT Pro Member

Joined: Sun Nov 10, 2013 10:52 pm
Posts: 67
Post Re: URGENT ANNOUNCEMENT - HEVI-Metal® and HEVI-Steel® shotsh
Ah shit, I'm about 4 boxes into a case now, gonna have to check the lot #. I swear I'm not much on blaming anything but myself for a missed bird but there were a few shots I know damn well should've went down lol!!! Gonna check this out. Thanks for the post


Sat Nov 22, 2014 10:11 am
Profile
MMT 1000 Club

Joined: Wed Jan 18, 2012 7:21 pm
Posts: 2207
Location: North Alabama
Post Re: URGENT ANNOUNCEMENT - HEVI-Metal® and HEVI-Steel® shotsh
Royboy10 how you liking the Hevi steels? Minus this little incident

_________________
2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD

2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD


Sat Nov 22, 2014 11:42 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 15 posts ] 

Who is online

Users browsing this forum: No registered users and 266 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: