| It is currently Sun Nov 10, 2024 2:23 pm |
|
Page 1 of 2 |
[ 41 posts ] | Go to page 1, 2 Next |
| Print view | Previous topic | Next topic |
Uncle J Custom w/ 2010 36 PD
| Author | Message |
|---|---|
|
MMT Pro Member  Joined: Tue Feb 24, 2009 10:01 am Posts: 153 
|
 Uncle J Custom w/ 2010 36 PDMM Brand:Prodrive
Horsepower:36 Boat Brand:Uncle J Custom Boat Size:17'6x48 Boat Layout:bateau style w/ fishing deck,middle bench and driveers seat Speeds | Shallow Water:N/A Speeds | Deep Water:31 mph Total Boat Load With Gear Etc:Me And My Wife,10 gallons of gas Conditions Tested In:Light Chop on lake with some wind Comments:Boat is awesome.Got to run it for about 3 hours yesterday.Made a ride from our hunting lease to the Lake View Inn for the Pig Roast.Had my wife with me on the ride there.Ran 28.5 to 29 mph steady.On the way back I was by myself.Ran 30.6 pretty steady saw 31 a few times.Very happy with the boat.It's set up like I wanted it.Just need to get a paint job now and ill be ready You do not have the required permissions to view the files attached to this post. _________________ 17'6x48 Uncle J Custom 36 MAFIA 2010 36PD Hydro trim w/FPR MarshMellow Exhaust I MIGHT BE WRONG BUT U NOT RIGHT |
| Sun Feb 28, 2010 9:25 am |
|
|
|
|
MMT Elite Member  Joined: Tue Jan 13, 2009 8:02 pm Posts: 6243 Location: Bossier City
|
Re: Uncle J Custom w/ 2010 36 PD Post up some pics.
_________________ 18x48 Charles Leonard / 36PD "I do think there is a Squatch in these woods"!!!!! |
| Sun Feb 28, 2010 9:47 am |
|
|
|
|
MMT 1000 Club  Joined: Thu Aug 27, 2009 5:22 pm Posts: 2029 Location: Patterson LA
|
Re: Uncle J Custom w/ 2010 36 PD Impressive speed. I went to Uncle Js house when it was being built. Came out good. Glad your happy with it.
_________________ 19x48 Rink/Aucoin Bateau w/35 GTR 20x60 Home-made skiff w/200 Merc |
| Sun Feb 28, 2010 10:59 am |
|
|
|
|
MMT F.E.
Joined: Tue Jul 21, 2009 7:06 am Posts: 916 Location: South,La
|
Re: Uncle J Custom w/ 2010 36 PD since u are from the brule road all information on this thread is dis-credited and voided..
ima get mine built soon and post some speeds up so it can come from a good source   _________________ 1648 w/ a 36 pd fpr on dat biatch G-14 CLASSIFIED SKIFF ON DA WAY!! Never try to educate someone who resists knowledge at all costs. |
| Sun Feb 28, 2010 8:50 pm |
|
|
|
|
MMT Pro Member Joined: Tue Feb 24, 2009 10:01 am Posts: 153
|
Re: Uncle J Custom w/ 2010 36 PD Just bring whatever ya got and come ride one weekend.Then we'll see whats happenin! Whit ya classified skiff.
_________________ 17'6x48 Uncle J Custom 36 MAFIA 2010 36PD Hydro trim w/FPR MarshMellow Exhaust I MIGHT BE WRONG BUT U NOT RIGHT |
| Sun Feb 28, 2010 9:08 pm |
|
|
|
|
MMT F.E.
Joined: Tue Jul 21, 2009 7:06 am Posts: 916 Location: South,La
|
Re: Uncle J Custom w/ 2010 36 PD ma boat is in lab_ville gettn diagnosed right na.. im always down to ride and drink a few tho..
_________________ 1648 w/ a 36 pd fpr on dat biatch G-14 CLASSIFIED SKIFF ON DA WAY!! Never try to educate someone who resists knowledge at all costs. |
| Sun Feb 28, 2010 9:13 pm |
|
|
|
|
MMT Sponsor
Joined: Fri Jul 24, 2009 7:26 am Posts: 10388 Location: S-Ville, LA
|
Re: Uncle J Custom w/ 2010 36 PD |
| Sun Feb 28, 2010 9:21 pm |
|
|
|
|
MMT F.E.
Joined: Tue Jul 21, 2009 7:06 am Posts: 916 Location: South,La
|
Re: Uncle J Custom w/ 2010 36 PD u dont have to hold onm tight !!!! jus make sure u can swim or have on a pfd!!!
_________________ 1648 w/ a 36 pd fpr on dat biatch G-14 CLASSIFIED SKIFF ON DA WAY!! Never try to educate someone who resists knowledge at all costs. |
| Sun Feb 28, 2010 9:24 pm |
|
|
|
|
MMT Sponsor
Joined: Fri Jul 24, 2009 7:26 am Posts: 10388 Location: S-Ville, LA
|
Re: Uncle J Custom w/ 2010 36 PD SB,
Is your G-14 going to have a V bottom going to a pad? |
| Sun Feb 28, 2010 9:30 pm |
|
|
|
|
MMT Pro Member Joined: Tue Feb 24, 2009 10:01 am Posts: 153
|
Re: Uncle J Custom w/ 2010 36 PD schrieverboy Shoot me a PM with your number we always go ride.We can go all over our hunting lease due to high water.So we gonna ride alot next few months.
_________________ 17'6x48 Uncle J Custom 36 MAFIA 2010 36PD Hydro trim w/FPR MarshMellow Exhaust I MIGHT BE WRONG BUT U NOT RIGHT |
| Sun Feb 28, 2010 9:48 pm |
|
|
|
|
MMT 1000 Club  Joined: Wed Jan 14, 2009 5:23 am Posts: 4514 Location: Lafayette, La
|
Re: Uncle J Custom w/ 2010 36 PD Damn nice speeds man, Good lookin boat too
|
| Mon Mar 01, 2010 7:51 am |
|
|
|
|
MMT Pro Member
Joined: Mon Jan 26, 2009 10:04 am Posts: 480 Location: Laplace, LA
|
Re: Uncle J Custom w/ 2010 36 PD Sweet looking rig and nice speed. Wanta see it on my GPS:)
 _________________ 1754 PD Center Console, 60 Yammy, w jack plate |
| Mon Mar 01, 2010 8:28 pm |
|
|
|
|
MMT Addict Joined: Thu May 07, 2009 10:25 am Posts: 714 Location: Thibodaux, LA
|
Re: Uncle J Custom w/ 2010 36 PD Great looking boat........very nice speeds. What rpms is the marine 36 turning on your rig?
I thought I recognized the launch but wasn't positive. I fish back there on and off in the spring and summer. I'll probably see you eventually. If that water keeps coming up the entire parish is gonna be one big pool of water with some trees in between. _________________ 16 x 48 Blanchard Bateau / 40 PD FPR Eat,Sleep, Fish, Hunt. Repeat. |
| Mon Mar 01, 2010 8:54 pm |
|
|
|
|
MMT Sponsor  Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX
|
Re: Uncle J Custom w/ 2010 36 PD pretty nice...just by lookin it seems as if there is no transom angle?
_________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS |
| Mon Mar 01, 2010 10:38 pm |
|
|
|
|
MMT 1000 Club
Joined: Fri Nov 13, 2009 8:47 pm Posts: 1039 Location: Texas
|
Re: Uncle J Custom w/ 2010 36 PD good lookin boat. i like the diamond plate
_________________ To be successful, you must decide exactly what you want to accomplish, then resolve to pay the price to get it. |
| Mon Mar 01, 2010 11:29 pm |
|
|
|
|
MMT Sponsor
Joined: Fri Jul 24, 2009 7:26 am Posts: 10388 Location: S-Ville, LA
|
Re: Uncle J Custom w/ 2010 36 PD |
| Tue Mar 02, 2010 7:47 am |
|
|
|
|
MMT F.E.  Joined: Thu Jan 15, 2009 7:34 pm Posts: 882 Location: Ahead of you, with a rubber band turning my prop!!
|
Re: Uncle J Custom w/ 2010 36 PD I like it
_________________ BUCK OFAMA |
| Thu Mar 04, 2010 3:01 pm |
|
|
|
|
MMT 1000 Club  Joined: Tue Jan 13, 2009 9:46 pm Posts: 4596 Location: East TEXAN Proud
|
Re: Uncle J Custom w/ 2010 36 PD Did our in-house Uncle J put the build on this boathull ??
Looks nice ..... you gonna paint it or leave it shinny ?? _________________ Git a Gator-Tail or ride in mines wake ...... MtrFact !!!!! '05 Model .... Still Number One on the Water !!!! |
| Thu Mar 04, 2010 4:05 pm |
|
|
|
|
MMT Pro Member Joined: Tue Feb 24, 2009 10:01 am Posts: 153
|
Re: Uncle J Custom w/ 2010 36 PD I'm gonna paint it Brooks. Just haven't found the time yet.
_________________ 17'6x48 Uncle J Custom 36 MAFIA 2010 36PD Hydro trim w/FPR MarshMellow Exhaust I MIGHT BE WRONG BUT U NOT RIGHT |
| Thu Mar 04, 2010 6:48 pm |
|
|
|
|
MMT 1000 Club  Joined: Wed Sep 16, 2009 3:47 pm Posts: 2261 Location: West Tennessee
|
Re: Uncle J Custom w/ 2010 36 PD HOw long is the waiting list on a Custom Uncle J??
_________________ If the Steel aint Flying the Birds aint Dying.... Uncle J 1948 holding a LT Uncle J 1848 w/? |
| Thu Mar 04, 2010 6:56 pm |
|
|
|
|
MMT Sponsor
Joined: Fri Jul 24, 2009 7:26 am Posts: 10388 Location: S-Ville, LA
|
Re: Uncle J Custom w/ 2010 36 PD Brule,
This is the one that is going to walk on the side of you... You do not have the required permissions to view the files attached to this post. |
| Thu Mar 04, 2010 7:26 pm |
|
|
|
|
MMT Pro Member Joined: Tue Feb 24, 2009 10:01 am Posts: 153
|
Re: Uncle J Custom w/ 2010 36 PD Yeah buddy that thing is nice.You painting his boat or what.
_________________ 17'6x48 Uncle J Custom 36 MAFIA 2010 36PD Hydro trim w/FPR MarshMellow Exhaust I MIGHT BE WRONG BUT U NOT RIGHT |
| Thu Mar 04, 2010 8:57 pm |
|
|
|
|
MMT Sponsor
Joined: Fri Jul 24, 2009 7:26 am Posts: 10388 Location: S-Ville, LA
|
Re: Uncle J Custom w/ 2010 36 PD Double Bottom, and Paint is on the agenda for Tomorrow. If you want to see the guy this boat is for, go look at the NSFW forum. (Candy) LOL
|
| Thu Mar 04, 2010 8:59 pm |
|
|
|
|
MMT Pro Member Joined: Tue Feb 24, 2009 10:01 am Posts: 153
|
Re: Uncle J Custom w/ 2010 36 PD how far does his deck go back
_________________ 17'6x48 Uncle J Custom 36 MAFIA 2010 36PD Hydro trim w/FPR MarshMellow Exhaust I MIGHT BE WRONG BUT U NOT RIGHT |
| Thu Mar 04, 2010 9:01 pm |
|
|
|
|
MMT Sponsor
Joined: Fri Jul 24, 2009 7:26 am Posts: 10388 Location: S-Ville, LA
|
Re: Uncle J Custom w/ 2010 36 PD |
| Thu Mar 04, 2010 9:02 pm |
|
|
|
|
MMT Pro Member Joined: Tue Feb 24, 2009 10:01 am Posts: 153
|
Re: Uncle J Custom w/ 2010 36 PD Yeah Looks good.Glad to see peeps are checking out your boats.They are built well.I'm glad i got mine from you didnt have to wait 4 months.
_________________ 17'6x48 Uncle J Custom 36 MAFIA 2010 36PD Hydro trim w/FPR MarshMellow Exhaust I MIGHT BE WRONG BUT U NOT RIGHT |
| Thu Mar 04, 2010 9:07 pm |
|
|
|
|
MMT Pro Member  Joined: Thu Feb 05, 2009 7:39 pm Posts: 417 Location: Lafayette, LA
|
Re: Uncle J Custom w/ 2010 36 PD I can't wait to pick it up tomorrow. That's one awesome boat Nonc J!
_________________ 35 hp CDI MB HD Sport pushing a 17'6" Uncle J custom bateau |
| Fri Mar 05, 2010 11:27 am |
|
|
|
|
MMT Sponsor
Joined: Fri Jul 24, 2009 7:26 am Posts: 10388 Location: S-Ville, LA
|
Re: Uncle J Custom w/ 2010 36 PD New Picture..
You do not have the required permissions to view the files attached to this post. |
| Fri Mar 05, 2010 1:47 pm |
|
|
|
|
MMT 1000 Club Joined: Wed Sep 16, 2009 3:47 pm Posts: 2261 Location: West Tennessee
|
Re: Uncle J Custom w/ 2010 36 PD Looks good Uncle J... Gotta work up a Tennessee Edition....
_________________ If the Steel aint Flying the Birds aint Dying.... Uncle J 1948 holding a LT Uncle J 1848 w/? |
| Fri Mar 05, 2010 4:16 pm |
|
|
|
|
MMT Sponsor
Joined: Fri Jul 24, 2009 7:26 am Posts: 10388 Location: S-Ville, LA
|
Re: Uncle J Custom w/ 2010 36 PD |
| Fri Mar 05, 2010 6:46 pm |
|
|
|
|
MMT 1000 Club Joined: Wed Sep 16, 2009 3:47 pm Posts: 2261 Location: West Tennessee
|
Re: Uncle J Custom w/ 2010 36 PD Dont judge us all by knowing cuttdown....
_________________ If the Steel aint Flying the Birds aint Dying.... Uncle J 1948 holding a LT Uncle J 1848 w/? |
| Fri Mar 05, 2010 6:50 pm |
|
|
|
|
MMT F.E.
Joined: Tue Jul 21, 2009 7:06 am Posts: 916 Location: South,La
|
Re: Uncle J Custom w/ 2010 36 PD almost looks professional jason..
damn good job t-neg _________________ 1648 w/ a 36 pd fpr on dat biatch G-14 CLASSIFIED SKIFF ON DA WAY!! Never try to educate someone who resists knowledge at all costs. |
| Sun Mar 07, 2010 10:14 am |
|
|
|
|
MMT Sponsor
Joined: Fri Jul 24, 2009 7:26 am Posts: 10388 Location: S-Ville, LA
|
Re: Uncle J Custom w/ 2010 36 PD |
| Fri Mar 12, 2010 11:56 am |
|
|
|
|
MMT F.E.
Joined: Tue Jul 21, 2009 7:06 am Posts: 916 Location: South,La
|
Re: Uncle J Custom w/ 2010 36 PD in a couple weeks.. itll be worth the wait
_________________ 1648 w/ a 36 pd fpr on dat biatch G-14 CLASSIFIED SKIFF ON DA WAY!! Never try to educate someone who resists knowledge at all costs. |
| Fri Mar 12, 2010 3:20 pm |
|
|
|
|
MMT Sponsor
Joined: Fri Jul 24, 2009 7:26 am Posts: 10388 Location: S-Ville, LA
|
Re: Uncle J Custom w/ 2010 36 PD Another Custom Sticker for a Custom Boat..
 You do not have the required permissions to view the files attached to this post. |
| Wed May 19, 2010 11:00 am |
|
|
|
|
MMT Pro Member Joined: Thu Feb 05, 2009 7:39 pm Posts: 417 Location: Lafayette, LA
|
Re: Uncle J Custom w/ 2010 36 PD I'm ridin spinners, I'm ridin spinners, They don't stop...
_________________ 35 hp CDI MB HD Sport pushing a 17'6" Uncle J custom bateau |
| Wed May 19, 2010 2:49 pm |
|
|
|
|
MMT Pro Member Joined: Tue Feb 24, 2009 10:01 am Posts: 153
|
Re: Uncle J Custom w/ 2010 36 PD yeah buddy cant wait to get them and slap them on side my boat.Custom Boat,Custom sticker,Costom Touch.Dats how we roll.
_________________ 17'6x48 Uncle J Custom 36 MAFIA 2010 36PD Hydro trim w/FPR MarshMellow Exhaust I MIGHT BE WRONG BUT U NOT RIGHT |
| Wed May 19, 2010 6:51 pm |
|
|
|
|
MMT Sponsor
Joined: Fri Jul 24, 2009 7:26 am Posts: 10388 Location: S-Ville, LA
|
Re: Uncle J Custom w/ 2010 36 PD In the Ghetto .... Talking bout them good ole days... The ghetto
|
| Thu May 20, 2010 7:32 am |
|
|
|
|
MMT Pro Member Joined: Tue Feb 24, 2009 10:01 am Posts: 153
|
Re: Uncle J Custom w/ 2010 36 PD they not going to know what to do when they see that sticker.Will be hard to see because i'm always in front of them.
_________________ 17'6x48 Uncle J Custom 36 MAFIA 2010 36PD Hydro trim w/FPR MarshMellow Exhaust I MIGHT BE WRONG BUT U NOT RIGHT |
| Thu May 20, 2010 7:50 pm |
|
|
|
|
MMT Addict
Joined: Tue Jan 13, 2009 5:44 pm Posts: 620 Location: Metairie, LA
|
Re: Uncle J Custom w/ 2010 36 PD _________________ "I have been blessed with many things in this life, an arm like a rocket, a c*ck like a Burmese Python and a mind of a f*ckin scientist." -Kenny F*ckin Powers Gator Trax 3-Man Gatorhide with a Mud Buddy HD Sport 5000 Large Big Green Egg with rounded chines |
| Thu May 20, 2010 8:58 pm |
|
|
|
|
|
Page 1 of 2 |
[ 41 posts ] | Go to page 1, 2 Next |
|
All times are UTC - 6 hours |
Who is online |
Users browsing this forum: No registered users and 49 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |