Author |
Message |
jakehawk9
MMT 1000 Club
Joined: Wed Jul 01, 2015 6:06 pm Posts: 1447 Location: South central, ks
|
Wiring killswitch predator 670
So here I am wanting to get my killswitch on before I go hunting. I'm curious which wires are my "spark wires" and how to hook them up to the kill switch. Any help would be appreciated.
I believe that thing with the cooling fins on it is my ignition module/coil
It's simple. get a mud motor. shoot ducks in the face.
|
Sat Nov 07, 2015 12:36 pm |
|
|
jakehawk9
MMT 1000 Club
Joined: Wed Jul 01, 2015 6:06 pm Posts: 1447 Location: South central, ks
|
Re: Wiring killswitch predator 670
I looked in my book and sadly there's no wiring diagram
The yellow wire is the low oil sensor. If I put the switch on that, will that kill it? It's simple. get a mud motor. shoot ducks in the face.
|
Sat Nov 07, 2015 12:38 pm |
|
|
SETx Longtail
MMT 1000 Club
Joined: Sun Sep 01, 2013 2:53 pm Posts: 3480 Location: Hardin County, Tx
|
Re: Wiring killswitch predator 670
I'd just set it up to break the 12v supply to your key switch. Probably the easiest way to go about it without a wiring diagram. That way if the switch is yanked, it'll be just like turning the key off.
_________________ #CFFITR
-Custom pool noodle -stage 4 water wings
|
Sat Nov 07, 2015 12:40 pm |
|
|
jakehawk9
MMT 1000 Club
Joined: Wed Jul 01, 2015 6:06 pm Posts: 1447 Location: South central, ks
|
Re: Wiring killswitch predator 670
Okay. I'll try to finger this out
It's simple. get a mud motor. shoot ducks in the face.
|
Sat Nov 07, 2015 12:41 pm |
|
|
flint87
MMT 1000 Club
Joined: Sun Dec 14, 2014 2:21 pm Posts: 3214
|
Re: Wiring killswitch predator 670
Ahhh who needs a kill switch anyways
Sent from my iPhone using Tapatalk
|
Sun Nov 08, 2015 7:27 am |
|
|
deadbird8
MMT 1000 Club
Joined: Wed Feb 04, 2009 7:50 pm Posts: 3833 Location: Old East Dallas, Texas
|
Re: Wiring killswitch predator 670
_________________ Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that
|
Sun Nov 08, 2015 9:11 pm |
|
|
deadbird8
MMT 1000 Club
Joined: Wed Feb 04, 2009 7:50 pm Posts: 3833 Location: Old East Dallas, Texas
|
Re: Wiring killswitch predator 670
_________________ Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that
|
Sun Nov 08, 2015 9:17 pm |
|
|
jakehawk9
MMT 1000 Club
Joined: Wed Jul 01, 2015 6:06 pm Posts: 1447 Location: South central, ks
|
Re: Wiring killswitch predator 670
Good to know!!!
It's simple. get a mud motor. shoot ducks in the face.
|
Sun Nov 08, 2015 10:20 pm |
|
|
jakehawk9
MMT 1000 Club
Joined: Wed Jul 01, 2015 6:06 pm Posts: 1447 Location: South central, ks
|
Re: Wiring killswitch predator 670
I appreciate your help
It's simple. get a mud motor. shoot ducks in the face.
|
Sun Nov 08, 2015 10:21 pm |
|
|
BERNIE255
MMT 1000 Club
Joined: Sun Jun 16, 2013 4:43 pm Posts: 1381 Location: Avoyelles Parish/ Marksville LA
|
Re: Wiring killswitch predator 670
Tie a string to the key and that string to you. Easy lol
Sent from my iPhone using Tapatalk
|
Sun Nov 08, 2015 11:31 pm |
|
|
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
Re: Wiring killswitch predator 670
Always install your kill switch inline with the kill wired that ground your coils from the key switch. Or also inline with the Low oil sensor like DB8 said. That will instantly stop fire.
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Mon Nov 09, 2015 9:59 am |
|
|
jakehawk9
MMT 1000 Club
Joined: Wed Jul 01, 2015 6:06 pm Posts: 1447 Location: South central, ks
|
Re: Wiring killswitch predator 670
I tried the low oil sensor. When I disconnected it the engine kept running
It's simple. get a mud motor. shoot ducks in the face.
|
Mon Nov 09, 2015 10:02 am |
|
|
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
Re: Wiring killswitch predator 670
For some reason I cannot see the pics, But you need to tap into the kill wire from the coils. It will run back to your key switch so find it and install kill switch there.
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Mon Nov 09, 2015 10:20 am |
|
|
jakehawk9
MMT 1000 Club
Joined: Wed Jul 01, 2015 6:06 pm Posts: 1447 Location: South central, ks
|
Re: Wiring killswitch predator 670
Alright. Thank you
It's simple. get a mud motor. shoot ducks in the face.
|
Mon Nov 09, 2015 10:47 am |
|
|
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
Re: Wiring killswitch predator 670
For the kill switch typically any two across from each other are the ones you want to connect. You can test with a meter to verify. Set to continuity and test the leads and you should see Open loop then when you pull the kill switch you should see something reading resistance. (completes to ground). Looking at your pic I would follow the small gauge black wire to see if it goes to the coils, and that will be your tie in wire if so.
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Mon Nov 09, 2015 11:37 am |
|
|
jakehawk9
MMT 1000 Club
Joined: Wed Jul 01, 2015 6:06 pm Posts: 1447 Location: South central, ks
|
Re: Wiring killswitch predator 670
Little update: I took my handy test light and went to wire searching. On the back of the ignition switch, the white wire is constant 12v, the yellow wire is on when you turn the key on and off when you turn it off. I tested both wires by starting the engine and disconnecting them. The yellow wire had a more "instant kill" so that is the one I used for the kill switch. If any ody wants pictures I can go take some later. I got kind of excited when I finally got it installed and working and forgot about the pictures. If you look at the first picture of the thread, the yellow wire I'm talking about is the one in that picture with the blue butt connector.
It's simple. get a mud motor. shoot ducks in the face.
|
Sat Dec 12, 2015 9:49 am |
|
|
WI715
MMT Pro Member
Joined: Sun Aug 27, 2017 6:24 am Posts: 53
|
Re: Wiring killswitch predator 670
_________________ Extreme Metal Fab 16x48 w/huntdeck 40EFI Backwater LT
|
Sat Sep 08, 2018 5:34 pm |
|
|
Russ
MMT 1000 Club
Joined: Mon Dec 31, 2012 11:07 pm Posts: 4820 Location: West Monroe, LA
|
Re: Wiring killswitch predator 670
He hasn't been around in a while. Probably not gonna be much help to you.
#CFFITR #TheGhostBoat #whoneedsphysicsihaveamudmotor
|
Sat Sep 08, 2018 8:35 pm |
|
|
|