| It is currently Fri Jun 27, 2025 6:01 am |
|
Page 1 of 1 |
[ 21 posts ] |
| Print view | Previous topic | Next topic |
Kohler question
| Author | Message |
|---|---|
|
MMT Pro Member
Joined: Fri Aug 07, 2009 8:23 pm Posts: 239 
|
 Kohler questionI was on the kohler website looking at the specs of the 34hp - 40hp kohler engines and noticed the specs were all the same. So I called the kohler dealer to see where they got the 6 extra hp from and he told me they got the 6 extra hp from the carburetor aspiration.
Since the 34-40hp models are the same but have different carbs on has anybody bought a 34hp kohler and put a mikuni on and then tested the engine to see if it this claim was right and had over 40hp since the mikuni will outperform a stock kohler carb. |
| Fri Mar 05, 2010 11:49 am |
|
|
|
|
MMT F.E.  Joined: Thu Jan 15, 2009 7:34 pm Posts: 882 Location: Ahead of you, with a rubber band turning my prop!!
|
Re: Kohler question I would bet the 34 hp is about 300/400 dollars cheaper right?
_________________ BUCK OFAMA |
| Fri Mar 05, 2010 1:28 pm |
|
|
|
|
MMT Pro Member
Joined: Fri Aug 07, 2009 8:23 pm Posts: 239
|
Re: Kohler question |
| Fri Mar 05, 2010 2:23 pm |
|
|
|
|
MMT Elite Member  Joined: Tue Jan 13, 2009 7:53 pm Posts: 7515 Location: Chauvin
|
Re: Kohler question _________________ 1750 GatorTail Extreme/Stage 3 37 GTR HD Procrastination is a lot like masturbation. Sure it sounds great at the time but, in the end your only f--k--g yourself. |
| Fri Mar 05, 2010 2:26 pm |
|
|
|
|
MMT Pro Member
Joined: Fri Aug 07, 2009 8:23 pm Posts: 239
|
Re: Kohler question When you guys are putting mukuni carbs on your 35/36 van what are your final hp and torque ratings after the upgrade.
|
| Fri Mar 05, 2010 2:28 pm |
|
|
|
|
MMT Elite Member Joined: Tue Jan 13, 2009 7:53 pm Posts: 7515 Location: Chauvin
|
Re: Kohler question I want to say the mikuni adds somwhere between 3-5 h.p. I don't know anyone that has actually put one on the dyno other than maybe EVT. Send drake1 a pm....he could give you more info on the actual hp/torque gains.
_________________ 1750 GatorTail Extreme/Stage 3 37 GTR HD Procrastination is a lot like masturbation. Sure it sounds great at the time but, in the end your only f--k--g yourself. |
| Fri Mar 05, 2010 2:37 pm |
|
|
|
|
MMT Pro Member
Joined: Fri Aug 07, 2009 8:23 pm Posts: 239
|
Re: Kohler question |
| Fri Mar 05, 2010 2:41 pm |
|
|
|
|
MMT Pro Member
Joined: Fri Aug 07, 2009 8:23 pm Posts: 239
|
Re: Kohler question How much of a difference will a compression of 8:8.1 compared to a compression of 8:5.1 make hp and torque wise.
|
| Fri Mar 05, 2010 2:49 pm |
|
|
|
|
MMT Elite Member Joined: Tue Jan 13, 2009 7:53 pm Posts: 7515 Location: Chauvin
|
Re: Kohler question None.
_________________ 1750 GatorTail Extreme/Stage 3 37 GTR HD Procrastination is a lot like masturbation. Sure it sounds great at the time but, in the end your only f--k--g yourself. |
| Fri Mar 05, 2010 2:52 pm |
|
|
|
|
MMT Pro Member
Joined: Fri Aug 07, 2009 8:23 pm Posts: 239
|
Re: Kohler question Wouldn't a 34hp kohler with a mikuni and a 40hp kohler with a mikuni carb have the same hp and torque ratings, since the 34hp kohler and the 40hp kohler are the same engines, with the same specs, but with different carbs on.
So wouldn't this statement be true? |
| Sat Mar 06, 2010 9:48 pm |
|
|
|
|
MMT Elite Member Joined: Tue Jan 13, 2009 7:53 pm Posts: 7515 Location: Chauvin
|
Re: Kohler question With all things being equal (bore....stroke......rpm.........comp. ratio......etc...) yes. It would be the same engine.
_________________ 1750 GatorTail Extreme/Stage 3 37 GTR HD Procrastination is a lot like masturbation. Sure it sounds great at the time but, in the end your only f--k--g yourself. |
| Sat Mar 06, 2010 9:51 pm |
|
|
|
|
MMT F.E. Joined: Thu Jan 15, 2009 7:34 pm Posts: 882 Location: Ahead of you, with a rubber band turning my prop!!
|
Re: Kohler question _________________ BUCK OFAMA |
| Sat Mar 06, 2010 9:53 pm |
|
|
|
|
MMT F.E.  Joined: Tue Jan 13, 2009 5:11 pm Posts: 955 Location: Lake Charles, LA
|
Re: Kohler question I never noticed that they both had same bore and stroke (61ci)... Restrictor plate in the carb? Hell yea buy the cheaper one and spend the money to buy the mikuni it all the power loss it in the carb setup.
|
| Sun Mar 07, 2010 9:37 am |
|
|
|
|
MMT Pro Member
Joined: Fri Aug 07, 2009 8:23 pm Posts: 239
|
Re: Kohler question |
| Sun Mar 07, 2010 4:21 pm |
|
|
|
|
MMT 1000 Club  Joined: Tue Jan 13, 2009 6:42 pm Posts: 2377 Location: West Coast Wisconsin
|
Re: Kohler question The cam is different also.
|
| Sun Mar 07, 2010 8:32 pm |
|
|
|
|
MMT Pro Member
Joined: Fri Aug 07, 2009 8:23 pm Posts: 239
|
Re: Kohler question If you google oem cams for 34hp kohler the sites say the cams are for 34-40 engines.
http://www.midwestsupercub.net/kohler_command.htm |
| Sun Mar 07, 2010 9:05 pm |
|
|
|
|
MMT 1000 Club Joined: Tue Jan 13, 2009 6:42 pm Posts: 2377 Location: West Coast Wisconsin
|
Re: Kohler question 36,38,40 hp
Part #62 010 05-S 34 hp Part #62 010 04-S Although the carb plays a big role also. |
| Sun Mar 07, 2010 9:32 pm |
|
|
|
|
MMT Pro Member
Joined: Fri Aug 07, 2009 8:23 pm Posts: 239
|
Re: Kohler question |
| Sun Mar 07, 2010 9:51 pm |
|
|
|
|
MMT Pro Member
Joined: Fri Aug 07, 2009 8:23 pm Posts: 239
|
Re: Kohler question |
| Sun Mar 07, 2010 9:55 pm |
|
|
|
|
MMT Pro Member
Joined: Fri Aug 07, 2009 8:23 pm Posts: 239
|
Re: Kohler question Does anybody know what the difference is between the 34hp kohler cam and the 36-40hp kohler cam.
|
| Sun Mar 07, 2010 10:12 pm |
|
|
|
|
|
Re: Kohler question what about timing advancements?
might could gain a lil' sumtin' by tweakin' dis as well! |
| Mon Mar 08, 2010 10:55 am |
|
|
|
|
|
Page 1 of 1 |
[ 21 posts ] |
|
All times are UTC - 6 hours |
Who is online |
Users browsing this forum: No registered users and 90 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |