|
FAQ
• Login
|
|
It is currently Mon Jun 03, 2024 4:12 pm
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Oil leak Black Death 4400 questions
Author |
Message |
Ap1286
MMT Member
Joined: Sun Apr 15, 2018 10:34 am Posts: 11
|
Oil leak Black Death 4400 questions
I ordered a new gasket so I have the oil leak under control. My question is I just replaced the gasket maybe 20 hours ago after changing out cams to a delta cam. Is there something special when installing this gasket or is there potentially something else wrong causing it to fail so quickly. Question number two is in the pics attached, the plates behind the belt housing, what order and direction do they go in bc either way seems to block some threaded holes. Unfortunately between work and rainy evenings and a sick baby I’ve been out here working on it when I can and it’s been about a week process. Thanks in advance for the help
Sent from my iPhone using Tapatalk
|
Wed Aug 01, 2018 2:41 pm |
|
|
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
Re: Oil leak Black Death 4400 questions
The design of the block and the bolt pattern is shit.
|
Wed Aug 01, 2018 3:12 pm |
|
|
GNSPEED
MMT Pro Member
Joined: Tue Dec 21, 2010 10:16 am Posts: 92
|
Re: Oil leak Black Death 4400 questions
Teflon to belt housing,then large plate ,the two hole shim onblock,notches on bottom.they all leak but make sure to clean threads on bolt and holes then red loctite.case gasket delete helps alot.
|
Wed Aug 01, 2018 8:19 pm |
|
|
GNSPEED
MMT Pro Member
Joined: Tue Dec 21, 2010 10:16 am Posts: 92
|
Re: Oil leak Black Death 4400 questions
Teflon to belt housing,then large plate ,the two hole shim onblock,notches on bottom.they all leak but make sure to clean threads on bolt and holes then red loctite.case gasket delete helps alot.
|
Wed Aug 01, 2018 8:19 pm |
|
|
Ap1286
MMT Member
Joined: Sun Apr 15, 2018 10:34 am Posts: 11
|
Re: Oil leak Black Death 4400 questions
Thanks guys, does the two hole shim go on top or bottom?
Sent from my iPhone using Tapatalk
|
Thu Aug 02, 2018 4:48 am |
|
|
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
Re: Oil leak Black Death 4400 questions
Quit using case gaskets. That will prolong the oil leak. I machine internals and use Yamabond 4 Clean all bolt holes, bolts, and Loctite them in place.
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Thu Aug 02, 2018 5:07 am |
|
|
GNSPEED
MMT Pro Member
Joined: Tue Dec 21, 2010 10:16 am Posts: 92
|
Re: Oil leak Black Death 4400 questions
two hole shim on top against case cover
|
Fri Aug 03, 2018 12:26 pm |
|
|
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 236 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|