Author |
Message |
browndog1
MMT Pro Member
Joined: Sat Nov 20, 2010 10:52 pm Posts: 53
|
 prodrive question
Just put a mikuni on a 32hp generac but I'm not sure what to do with this silver bar?
Uploaded with
|
Fri Jul 08, 2011 3:15 pm |
|
 |
browndog1
MMT Pro Member
Joined: Sat Nov 20, 2010 10:52 pm Posts: 53
|
 Re: prodrive question
It's actually a tube not a bar, but air comes out when the engine is running and it fed in right below the air filter on the old setup, no idea what I'm supposed to do with it now? anyone?
|
Sat Jul 09, 2011 1:11 pm |
|
 |
Sko
MMT F.E.
Joined: Thu Feb 03, 2011 11:41 am Posts: 769
|
 prodrive question
If it's your bowl overflow. Snake it trough the engine going down away from anything hot.
_________________ 18x54 Cajun Performance with Stage 1 35 GTR W/ Mikuni
|
Sat Jul 09, 2011 1:15 pm |
|
 |
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: prodrive question
Is it a breather? If so, just pick up a breather filter from your local auto parts store and put it in there.
|
Sat Jul 09, 2011 1:15 pm |
|
 |
Sko
MMT F.E.
Joined: Thu Feb 03, 2011 11:41 am Posts: 769
|
 prodrive question
O am still trying to figure what it is CB
_________________ 18x54 Cajun Performance with Stage 1 35 GTR W/ Mikuni
|
Sat Jul 09, 2011 1:18 pm |
|
 |
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: prodrive question
Looks like it's coming out of the block not the carb...Says it's blowing air out, not sucking air in... Only thing I can figure is a breather, but I dunno either, just guessing. 
|
Sat Jul 09, 2011 1:23 pm |
|
 |
dog walker
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5282 Location: Meraux,La.
|
 Re: prodrive question
On my gtr it's a hose I just ran it away from anything and let it blow
|
Sat Jul 09, 2011 1:31 pm |
|
 |
browndog1
MMT Pro Member
Joined: Sat Nov 20, 2010 10:52 pm Posts: 53
|
 Re: prodrive question
Ya it's coming off the block. It's kinda hard to see in the pics, but there is some rubber coming out and a little clip that holds the tube on.
|
Sat Jul 09, 2011 2:15 pm |
|
 |
pooldoo73
MMT F.E.
Joined: Tue Jan 25, 2011 5:47 pm Posts: 886 Location: Plaquemine
|
 Re: prodrive question
Crankcase vent? About the only thing going from block back to intake. Emissions crap.
_________________ 18'x54"CC Hanko/ 36PD
|
Sat Jul 09, 2011 7:40 pm |
|
 |
browndog1
MMT Pro Member
Joined: Sat Nov 20, 2010 10:52 pm Posts: 53
|
 Re: prodrive question
So can I just unclip it or do I need to put a filter on it? Also does the lower unit on the 04 only have a lower oil plug? The owners manual online shows an upper and lower but its for an 08.
|
Sat Jul 09, 2011 11:21 pm |
|
 |
dog walker
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5282 Location: Meraux,La.
|
 Re: prodrive question
If you unclip it there over time you will get oily residue on your carb from what is venting out of the block. That's why mine is run out of the way. If you can get a filter to put on it try that.
|
Sun Jul 10, 2011 6:02 am |
|
 |
browndog1
MMT Pro Member
Joined: Sat Nov 20, 2010 10:52 pm Posts: 53
|
 Re: prodrive question
I managed to find an owners manual for the engine and the part is listed as a breather tube. Is there anything wrong with just cutting it so it's only a few inches long and putting a filter on it?
|
Mon Jul 11, 2011 2:33 pm |
|
 |
POKER1
MMT Elite Member
Joined: Tue Jan 13, 2009 8:02 pm Posts: 6243 Location: Bossier City
|
 Re: prodrive question
Folks have removed the tube and added a filter to it like your talking about. Something similar to this one. http://shop.advanceautoparts.com/webapp ... P2019_____
_________________ 18x48 Charles Leonard / 36PD
"I do think there is a Squatch in these woods"!!!!!
|
Mon Jul 11, 2011 5:15 pm |
|
 |
|