Author |
Message |
ibfishin
MMT 1000 Club
Joined: Sun Dec 05, 2010 8:20 pm Posts: 1127 Location: Okeechobee, FL
|
 Theft prevention for motor
What do you guys use for a locking mechanism on your motors to slow thieves down? I tried a search but nothing about theft prevention popped up.
_________________ 35 GTR pushing an 18' Alumitech Custom
|
Wed Aug 03, 2011 6:32 pm |
|
 |
marshcreaper
MMT Pro Member
Joined: Sun May 01, 2011 6:52 pm Posts: 473 Location: New Iberia LA
|
 Re: Theft prevention for motor
we leave our go devils year around at the duck lease so what my dad did was welded an eye on each bolt on the motor that bolts it to the transome and put a lil piece ov chain with a lock that way they wont be able to turn the bolts ill take a pick of what it looks like we pulled one out to put a bigger motor
_________________ 1848 Cajun Performance GTR35
IF YOU AIN'T RUNNING WITH ME,,,,THEN RUN FROM ME!!!!!!!!!!!!
|
Wed Aug 03, 2011 6:41 pm |
|
 |
CaptCameltoe
MMT Pro Member
Joined: Wed Apr 27, 2011 12:51 pm Posts: 243 Location: Jeanerette La
|
 Re: Theft prevention for motor
I have seen boat transoms sawzalled around where the motor bolts to get it. Sadly those sorts of things only deter the lazy theivin bastards. I have been tryin to think of somethin also, as I plan on keepin my boat tied up out back in the water slightly out of my view from the house.
_________________ Just a displaced hillbilly in Cajunland
Beavertail Predator LT/17' alum vee total mismatch but ya use what ya gots
|
Wed Aug 03, 2011 6:46 pm |
|
 |
Goose Crumpler
MMT 1000 Club
Joined: Thu Dec 02, 2010 9:51 am Posts: 1404 Location: Northern Wisconsin
|
 Re: Theft prevention for motor
|
Wed Aug 03, 2011 6:48 pm |
|
 |
marshcreaper
MMT Pro Member
Joined: Sun May 01, 2011 6:52 pm Posts: 473 Location: New Iberia LA
|
 Re: Theft prevention for motor
_________________ 1848 Cajun Performance GTR35
IF YOU AIN'T RUNNING WITH ME,,,,THEN RUN FROM ME!!!!!!!!!!!!
|
Wed Aug 03, 2011 6:52 pm |
|
 |
marshcreaper
MMT Pro Member
Joined: Sun May 01, 2011 6:52 pm Posts: 473 Location: New Iberia LA
|
 Re: Theft prevention for motor
gangsta but its a gangsta go devil 
You do not have the required permissions to view the files attached to this post.
_________________ 1848 Cajun Performance GTR35
IF YOU AIN'T RUNNING WITH ME,,,,THEN RUN FROM ME!!!!!!!!!!!!
|
Wed Aug 03, 2011 7:01 pm |
|
 |
Tenpoint
MMT 1000 Club
Joined: Thu Aug 27, 2009 5:22 pm Posts: 2029 Location: Patterson LA
|
 Re: Theft prevention for motor
Keep a pit bull chained to it. 
_________________ 19x48 Rink/Aucoin Bateau w/35 GTR 20x60 Home-made skiff w/200 Merc
|
Wed Aug 03, 2011 7:37 pm |
|
 |
bayouboy
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5376 Location: Venice, La
|
 Re: Theft prevention for motor
Full coverage insurance!
|
Wed Aug 03, 2011 8:21 pm |
|
 |
POKER1
MMT Elite Member
Joined: Tue Jan 13, 2009 8:02 pm Posts: 6243 Location: Bossier City
|
 Re: Theft prevention for motor
_________________ 18x48 Charles Leonard / 36PD
"I do think there is a Squatch in these woods"!!!!!
|
Wed Aug 03, 2011 8:22 pm |
|
 |
bayouboy
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5376 Location: Venice, La
|
 Re: Theft prevention for motor
And a warranty! 
|
Wed Aug 03, 2011 8:24 pm |
|
 |
bjg
MMT F.E.
Joined: Thu Jan 15, 2009 7:34 pm Posts: 882 Location: Ahead of you, with a rubber band turning my prop!!
|
 Re: Theft prevention for motor
_________________ BUCK OFAMA
|
Wed Aug 03, 2011 8:30 pm |
|
 |
quaak
MMT Pro Member
Joined: Wed Nov 03, 2010 9:27 am Posts: 108 Location: Alabama
|
 Re: Theft prevention for motor
_________________ 2011 35 GDSD pushing 1844 Go-Devil Hull
|
Wed Aug 10, 2011 3:21 pm |
|
 |
SMELVIN
MMT Addict
Joined: Wed Sep 01, 2010 4:25 pm Posts: 638
|
 Re: Theft prevention for motor
all a lock does is keep an honest man honest. if a crook wants it bad enough. he is going to take it no matter what you have. i would go with the insurance route
|
Wed Aug 10, 2011 3:34 pm |
|
 |
CaptCameltoe
MMT Pro Member
Joined: Wed Apr 27, 2011 12:51 pm Posts: 243 Location: Jeanerette La
|
 Re: Theft prevention for motor
insurance companies are the biggest crooks out there, next to politicians and lawyers of course.
_________________ Just a displaced hillbilly in Cajunland
Beavertail Predator LT/17' alum vee total mismatch but ya use what ya gots
|
Wed Aug 10, 2011 3:51 pm |
|
 |
bobbyjober
MMT Addict
Joined: Sun Aug 08, 2010 3:28 pm Posts: 546 Location: St. Martinville, La
|
 Re: Theft prevention for motor
I just run a Mudbuddy. In the deep south Louisiana even the thieves want a GTR or PD, so I am all good.
_________________ 1542 FLATBOTTOM WITH 24 HONDA MUD BUDDY MINI TURNING A 12" GDSD PROP/17 FT XPRESS CENTER CONSOLE WITH 90 MARINER
|
Wed Aug 10, 2011 3:56 pm |
|
 |
ibfishin
MMT 1000 Club
Joined: Sun Dec 05, 2010 8:20 pm Posts: 1127 Location: Okeechobee, FL
|
 Re: Theft prevention for motor
I always go the insurance full coverage route. Just looking for a mechanical deterant as well.
_________________ 35 GTR pushing an 18' Alumitech Custom
|
Wed Aug 10, 2011 4:01 pm |
|
 |
Team Camo
MMT Sponsor
Joined: Thu Oct 01, 2009 4:49 pm Posts: 8536 Location: Bridge City, TX
|
 Re: Theft prevention for motor
Put a Honda sticker on it. Starting Sept 1 thieves are only going to be stealing American made products to help boost the economy. 
_________________ 1846 GTB & 35 GTR Team Gator-Tail
Killer Kallz & ANGLE PORT dealer (409) 720-8949
|
Wed Aug 10, 2011 4:03 pm |
|
 |
Robn1020
MMT 1000 Club
Joined: Mon Feb 16, 2009 6:09 pm Posts: 4232 Location: Cypress, TX
|
 Re: Theft prevention for motor
|
Wed Aug 10, 2011 4:28 pm |
|
 |
ibfishin
MMT 1000 Club
Joined: Sun Dec 05, 2010 8:20 pm Posts: 1127 Location: Okeechobee, FL
|
 Re: Theft prevention for motor
2 nights ago A buddy of mine woke at 3:20am to find a guy hooking up to his 27 Contender using a little truck. He yelled the guy hopped in and tried to haul ass. Buddy ran to his truck in his boxers (while wife called 911). It had just rained so he followed the bilge trail. He hit the streets and saw reds and blues out of his periphery. The thief tried to run and missed a turn. The boat came unhitched and kept going until it went through a ditch. Trailer is f'ed up and a once spotless boat has quite a bit of gel coat and fiberglass damage. The thief took off on foot and was apprehended by 6:00am. Some cuban out of Miami stealing the boat for the human smuggling industry. If you have a boat with Yamaha's in Florida or Bahamas it is a target.
_________________ 35 GTR pushing an 18' Alumitech Custom
|
Fri Aug 12, 2011 8:12 pm |
|
 |
WESTON
MMT Pro Member
Joined: Wed Sep 29, 2010 6:48 am Posts: 191
|
 Re: Theft prevention for motor
I am thinking about welding a piece of between the bolts. That way I can cut it off if I ever need to take the motor off.
_________________ Longhorn custom 1660+huntdeck pushed by a 35GTR
|
Fri Aug 12, 2011 8:54 pm |
|
 |
DeathMetalDukk
MMT 1000 Club
Joined: Sat Jun 27, 2009 11:50 pm Posts: 3777 Location: Knotts Island, North Carolina.
|
 Re: Theft prevention for motor
There is nothing you can do that a sawzall and a pair of bolt cutters cannot undo. Just stating the truth, I'd get insurance, or find a better place to live. 
_________________ Put yer face in the myrtles.
35 GTR chasing a 1650 Polarkrap.
|
Fri Aug 12, 2011 9:21 pm |
|
 |
Team Camo
MMT Sponsor
Joined: Thu Oct 01, 2009 4:49 pm Posts: 8536 Location: Bridge City, TX
|
 Re: Theft prevention for motor
^^^X2!!!
_________________ 1846 GTB & 35 GTR Team Gator-Tail
Killer Kallz & ANGLE PORT dealer (409) 720-8949
|
Fri Aug 12, 2011 9:22 pm |
|
 |
Goose Crumpler
MMT 1000 Club
Joined: Thu Dec 02, 2010 9:51 am Posts: 1404 Location: Northern Wisconsin
|
 Re: Theft prevention for motor
If you use thru hardened chain they would go through 50 blades before they got through it, unlike case hardened chain. You gotta use a torch to cut that chit.
|
Sat Aug 13, 2011 12:39 pm |
|
 |
MeatWagon
MMT Pro Member
Joined: Tue Jan 25, 2011 1:22 pm Posts: 497
|
 Re: Theft prevention for motor
Theft Prevention - 12 Gauge , .40 S&W, and about a hundred foot of 1 in rope to hang the bastad that tried to steal my boat or anything else. 
_________________ SENT VIA HOOT OWL!
I drive a Godevil and don't give a shit about your message!!!
MeatWagon GoDevil 35 Surface Drive on a 13x60 MaxCraft AIRBOAT HULL!
|
Sat Aug 13, 2011 1:43 pm |
|
 |
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: Theft prevention for motor
Just chain about a hundred and fifty lb rott to it. If you keep him a lil hungry, that probably wouldn't hurt. I can tell you that my ass wouldn't be getting close to it.
|
Sat Aug 13, 2011 1:58 pm |
|
 |
bayouboy
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5376 Location: Venice, La
|
 Re: Theft prevention for motor
|
Tue Aug 16, 2011 11:16 am |
|
 |
Chico80x
MMT Addict
Joined: Tue Aug 11, 2009 10:55 am Posts: 743 Location: Ft. Lauderdale, FL
|
 Re: Theft prevention for motor
http://www.finditnowusa.com put one in your boat and the second it detects motion, it will send you a text message and alert you to it's position. Only then will a 12ga really be useful because you can have all the guns in the world, that if you don't catch them in the act, they're useless. You could also use a Garmin GTU10 but it'll only work if they steal the whole boat.
_________________ "We Are Products Of Our Decisions"
Gator Trax 1750HD With Mud Buddy Black Death 5500
|
Tue Aug 16, 2011 5:56 pm |
|
 |
DeathMetalDukk
MMT 1000 Club
Joined: Sat Jun 27, 2009 11:50 pm Posts: 3777 Location: Knotts Island, North Carolina.
|
 Re: Theft prevention for motor
_________________ Put yer face in the myrtles.
35 GTR chasing a 1650 Polarkrap.
|
Tue Aug 16, 2011 6:39 pm |
|
 |
Tenpoint
MMT 1000 Club
Joined: Thu Aug 27, 2009 5:22 pm Posts: 2029 Location: Patterson LA
|
 Re: Theft prevention for motor
Weld the motor to the boat.
_________________ 19x48 Rink/Aucoin Bateau w/35 GTR 20x60 Home-made skiff w/200 Merc
|
Tue Aug 16, 2011 6:40 pm |
|
 |
DeathMetalDukk
MMT 1000 Club
Joined: Sat Jun 27, 2009 11:50 pm Posts: 3777 Location: Knotts Island, North Carolina.
|
 Re: Theft prevention for motor
Fukk it- Get a steel Conex Box (the containers used for freight), back your boat in there, put a 10' chain link fence w/ barbed wire all the way around, a very visible camera on a street light post on every corner, buy 2 Rottweilers to put in the fence, and hire a security guard to watch it. 
_________________ Put yer face in the myrtles.
35 GTR chasing a 1650 Polarkrap.
|
Tue Aug 16, 2011 6:44 pm |
|
 |
Tenpoint
MMT 1000 Club
Joined: Thu Aug 27, 2009 5:22 pm Posts: 2029 Location: Patterson LA
|
 Re: Theft prevention for motor
_________________ 19x48 Rink/Aucoin Bateau w/35 GTR 20x60 Home-made skiff w/200 Merc
|
Tue Aug 16, 2011 6:45 pm |
|
 |
Team Camo
MMT Sponsor
Joined: Thu Oct 01, 2009 4:49 pm Posts: 8536 Location: Bridge City, TX
|
 Re: Theft prevention for motor
_________________ 1846 GTB & 35 GTR Team Gator-Tail
Killer Kallz & ANGLE PORT dealer (409) 720-8949
|
Tue Aug 16, 2011 7:00 pm |
|
 |
DeathMetalDukk
MMT 1000 Club
Joined: Sat Jun 27, 2009 11:50 pm Posts: 3777 Location: Knotts Island, North Carolina.
|
 Re: Theft prevention for motor
_________________ Put yer face in the myrtles.
35 GTR chasing a 1650 Polarkrap.
|
Tue Aug 16, 2011 7:04 pm |
|
 |
SmokeEater829
MMT 1000 Club
Joined: Sat Jun 13, 2009 8:48 pm Posts: 1830 Location: Belle Chasse, LA
|
 Re: Theft prevention for motor
I'll keep paying my $350 a year insurance premium. And if someone wants it more than I do, I get to design and order a new one!
_________________ Mud Buddy 4500 Black Death hauling the Uncle J 18x58
|
Tue Aug 16, 2011 7:05 pm |
|
 |
Tenpoint
MMT 1000 Club
Joined: Thu Aug 27, 2009 5:22 pm Posts: 2029 Location: Patterson LA
|
 Re: Theft prevention for motor
Just keep a 10 year old, beat to hell boat like mine and nobody wants to steal it.
_________________ 19x48 Rink/Aucoin Bateau w/35 GTR 20x60 Home-made skiff w/200 Merc
|
Tue Aug 16, 2011 7:22 pm |
|
 |
Team Camo
MMT Sponsor
Joined: Thu Oct 01, 2009 4:49 pm Posts: 8536 Location: Bridge City, TX
|
 Re: Theft prevention for motor
_________________ 1846 GTB & 35 GTR Team Gator-Tail
Killer Kallz & ANGLE PORT dealer (409) 720-8949
|
Tue Aug 16, 2011 7:47 pm |
|
 |
|