|
|
FAQ
• Login
|
|
It is currently Mon Jun 23, 2025 11:38 am
|
|
Page 1 of 1
|
[ 6 posts ] |
|
40 kohler pro vs 35 briggs van
| Author |
Message |
|
Snowbird
MMT Pro Member
Joined: Sat Aug 08, 2009 12:44 am
Posts: 91
Location: Salt Lake City, Ut 84121
|
 40 kohler pro vs 35 briggs van has anyone here run one of these yet? i'm looking at the specs and finding it hard to believe that they can pull 5 more hp from just 6cc more displacement. i also realize that the proof is in how it runs, so how do these two stack up side by side? anyone run them both yet?
_________________
23 MB mini w/ IM heads, BPS rockers/rods and gutted exhaust on a rivited 1648 crestliner.
|
| Thu Aug 13, 2009 2:35 pm |
|
|
|
Gigafowl
MMT Elite Member
Joined: Tue Jan 13, 2009 7:19 pm
Posts: 6441
Location: Trinity Bay - Texas
|
Re: 40 kohler pro vs 35 briggs van Been some posts and opinions you can search....
The Kohler was 40 hp before the MB guys put on the carb that
supposedly makes the difference.... Curious about this one
myself - Kohler makes some pretty strong motors.... But word
was that the hp and torque curves were not right for a MM - at
least with the original kohler carb design....
_________________
Eat - Sleep - Hunt ! ! !
"It is good to have an end to journey toward; but
it is the journey that matters, in the end."
|
| Thu Aug 13, 2009 2:47 pm |
|
|
|
deadbird8
MMT 1000 Club
Joined: Wed Feb 04, 2009 7:50 pm
Posts: 3833
Location: Old East Dallas, Texas
|
Re: 40 kohler pro vs 35 briggs van I have only run it with a Mikuni on it ~25 hours. Great accelleration and power through the power band. Smoother running motor compared with the briggs. Pushed my 1754 Excel MW over 30 with 2 people (similar to my Briggs 35 with Mikuni, exhaust, and headwork).
_________________
Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that
|
| Thu Aug 13, 2009 5:03 pm |
|
|
|
Gigafowl
MMT Elite Member
Joined: Tue Jan 13, 2009 7:19 pm
Posts: 6441
Location: Trinity Bay - Texas
|
Re: 40 kohler pro vs 35 briggs van This is the thread I remembered from where Deadbird ran it.. viewtopic.php?f=2&t=2860
_________________
Eat - Sleep - Hunt ! ! !
"It is good to have an end to journey toward; but
it is the journey that matters, in the end."
|
| Thu Aug 13, 2009 5:06 pm |
|
|
|
deadbird8
MMT 1000 Club
Joined: Wed Feb 04, 2009 7:50 pm
Posts: 3833
Location: Old East Dallas, Texas
|
Re: 40 kohler pro vs 35 briggs van It was a prototype last year- had it a couple of months:
_________________
Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that
|
| Thu Aug 13, 2009 7:47 pm |
|
|
|
Snowbird
MMT Pro Member
Joined: Sat Aug 08, 2009 12:44 am
Posts: 91
Location: Salt Lake City, Ut 84121
|
Re: 40 kohler pro vs 35 briggs van thanks for the replies. it sounds like a good motor so i might just have to take a chance on it.
|
| Fri Aug 14, 2009 12:31 am |
|
|
|
|
|
Page 1 of 1
|
[ 6 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 122 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
