Call me ASAP!!!!

That's why I pick and choose what goes into my engine. If you can't wrench on your own motor and I ain't talking basic maintenance/adjustments here, you better be willing to break out the checkbook or just keep it stock.

Yea I have seen some REALLY bad work like it was done out of some garage without the proper tools. its not mostly the looks of the work either its the measurements that have been taken like they sould be CC'ing the head volume when the deck them down to match precise compression. cc and measure size in ports for the head for equal air flow. etc. etc.

I think these motors are safe under 4400 and 11.5:1 compression anymore its a time bomb. thats why I run stock. the guys at Briggs & Stratton (vanguard) are not rednecks with a GED they design an engine that will produce that rated hp at 3600 for a long damn time. I understand that we are doing things to those motors thats pretty cool but there is a limit.

Radical mods makes me laugh....its not a race boat....its like dumping 3000 dollars into a V6 mustang and trying to make it run like a V8 why dont anybody put larger engines on them or two (reliable horse power)

oh yea weight....(larger engines or twin engines).....weight to power ratio, thats what makes anyting fast.
35 hp on a boat that weighs 1500 lb or a 70hp that weighs 1750lbs (two engines) weight to power ratio changes.....

Kinda obvious myboy, not just in workmanship but parts pricing as well, Just compair a set of roller rockers for a V8 to a set for a Briggs! you can get 16 for a V8 for the same price you get 4 for a Briggs.

They can cry custom parts cost money all day long and thats right, they do! BUT, SOB 4 to 1! Billet rods aren't any better!



Your gonna pay to play!

It really doesn't pay to bitch about it unless you got something better to share with us!

Yes, I have just started my new mud motor project to be done by march 3cyl liquid cooled 1.0l geo metro engine. I will be making the outdrive and everything else that i cant get off the shelf. also i will be converting it to a speed desnity/fuel table fuel injection system to help with all the angles the engine rotates as an outboard. (had a 29hp kaw mud buddy longtail that was a fuelie). I will be posting in other threads as the project gets underway.

x2 yes ya pay to play.

well 50 i was fishing and had a few beers and brought my radar gun just to check you guys out, i see that you guys are getting close to me looks like i am going to have light a wick under mine later toby

what kinds of speeds did u see on your radar gun if ya dont mind me askin

i seen 2 of them running around at 40mph, one was blipping the throttle and the other boat had 2 people in the boat, and they sounded healthy, 50 i heard you was into mud motors, you no rivalry goes back a long ways, were is the silver bullett hidding at i no you have something up your sleeve when i find out i am telling everybody i have my eye on you 50

you shoulda came and joined us

i am from pierre part and met this guy in eunice
about 10 years ago at drag strip, he finder me out the back door i came back next weekend and he findered me again,a few years later we tied up again at the boat races it was what and what found out he was racing gokarts so i built me one and ran RWYB and the sob took my money, i have had a mud motor for several years you cant hide from me and if you want to race on bicycle we can do that to i am coming for you boy

yes we can 50 i have had i eye on you, i have watched yall guys run and it is looking good motor sounds healthy, are you building those motors

well you drove right by me in your boat i did a good job not letting yall see my radar gun, by the way i had 2 radar guns to check you with, we caught a few fish,drank some beer, took some notes and did a good job of hiding the radar gun , and i like your winch on front of your boat and your radio ice chest, later out front again toby

Well if you were watching us you didnt see much because those were our huntin motors not the fast motors so you pretty much wasted your time sorry try agian

Chops man it sounds like you have a stalker you better watch your bak man

That is not the first time that i have seen you guys running , you have picked up some speed in the past couple months , like i said when you get close to me then i will show up and teach school , i have put the radar gun on you when it was just you in your boat (at another location) and have seen how fast you and the others guys are i have been at the boat launch when you guys launched your boats later out front again toby

50 i have been waiting along time to hook back up

if u have seen us runnin before why dont ya join us..and RUN WHAT YA BRUNG

This is getting gahy

Alrite the gay shi+ is getin old i dont get on yalls post and niggger them up
And what are you calling gay?

no reason to argue chop i have met you before and i think you are a great guy i work alot in texas area, and you do good work on metal buildings you build on for a friend on mine i met you last year, what makes racing fun is people with diffrent motors just like mercury and omc so dont get to fighting over something silly, i am a old man i have been there and done that, and i like to see you younger guys carring on the fun of the sport so the guy with the rude comment he is just mad because he is not as fast as he thinks he is because i no i have radar him to he just likes to blow smoke i have him covered quite well and chop your boat looks good keep up the work.

rmd1970 maybe you should just not post specially when you dont have anything that is fast

maXXis85 if you dont have a mudmotor that is fast y are you even on here and you dont have nothing that is fast

Sabine river killer...bring that radar gun of yours to the mud and play with us